Integra DTR-8.4 instruction manual Playing a DVD, Selecting Listening Modes

Quick Guide.fm Page 4 Thursday, October 16, 2003 9:30 AM

Playing a DVD

3

3 3 5

1.Turn on your DVD player and TV.

2.Select the appropriate input on your TV.

Select the input to which the DTR-8.4 is connected.

3.Select the DVD input source.

Roll the scroll wheel to select the DVD input source.

While neither the [Mode] button nor [Input] button is illuminated, rolling the scroll wheel changes the input source and remote controller mode.

4.Start playback on your DVD player.

Make sure that your DVD player’s digital audio out- put is turned on. On some players, the default setting is off. With some DVD-Video discs, you can select the audio format (Dolby Digital, DTS, PCM) from a menu.

5.Adjust the volume.

To adjust the volume, use the remote controller’s [VOL] button.

The volume can be adjusted from 0 to 100. Since the DTR-8.4 has been designed for home theater enjoy- ment, it has a wide volume range, allowing precise adjustment.

Selecting Listening Modes

Scroll wheel

Surround, THX,

All CH ST,

Stereo, Pure A,

Direct

Press the scroll wheel, and then use the [Sur- round], [THX], [All CH ST], [Stereo], [Pure A], [Direct], or DSP []/[ ] buttons to select a lis- tening mode.

Notes:

•You cannot select any listening modes while the Mul- tich input source is selected.

•Depending on the number of speakers that you con- nect, and the format of the input signal, you may not be able to select all of the listening modes.

•While the Pure Audio listening mode is selected, the video circuits are turned off and the DTR-8.4 outputs no video signals.

■[Pure A] button (remote controller)

This button selects the Pure Audio listening mode.

■[Direct] button (remote controller)

This button selects the Direct listening mode.

■[Direct/Pure Audio] button (DTR-8.4)

This button selects the Direct and Pure Audio listening modes.

■[Stereo] button

This button selects the Stereo listening mode.

■[Surround] button

This button selects the following listening modes for use with 2-channel analog input sources: Dolby Pro Logic II Movie, Dolby Pro Logic II Music, DTS Neo:6 Cinema, and DTS Neo:6 Music.

If the current input source is digital, you can select Dolby Digital, Dolby Digital EX, DTS, DTS-ES, or DTS Neo: 6 with this button.

■[THX] button

This button selects the THX listening modes. With 2- channel input sources, THX can be applied to Dolby Pro Logic II Movie or DTS Neo:6 Cinema.

The THX listening modes can be selected if the current input source is either analog or digital. If it’s digital, you can use this button to apply THX to DTS or DTS-ES.

■DSP []/[ ] buttons

These buttons are used to select Integra’s own DSP lis- tening modes—Orchestra, Unplugged, Studio Mix, etc., and Mono or Theater-Dimensional.

■[All CH ST] button (remote controller)

This button selects the All Ch Stereo listening mode.

SN 29343579 I0310-1