Integra DTR-8.4 Specifications, Amplifier Section, General, Video Section, Tuner Section

DTR-8.4_En.book Page 103 Thursday, October 16, 2003 11:09 AM

Specifications

Amplifier Section

Power output:	110 W (8 Ω, 20 Hz–20 kHz, FTC)
All channels:	(American Model)
	150 W (6 Ω, 1 kHz, DIN)
	(Australian model)
Dynamic power:	2 x 280 W (3 Ω, front)
	2 x 220 W (4 Ω, front)
	2 x 140 W (8 Ω, front)
THD (total harmonic
distortion):	0.08% (rated power)
Damping factor:	60 (8 Ω)
Input sensitivity and	200 mV/50k Ω (LINE)
impedance:
	2.5 mV/50k Ω (PHONO MM)
Output level and	200 mV/470 Ω (REC OUT)
impedance:
Phono overload:	120 mV (MM, 1 kHz, 0.5%)
Frequency response:	5 Hz–100 kHz/+1 dB, –3 dB (CD, Direct)
Tone control:	±10 dB, 50 Hz (BASS)
	±10 dB, 20,000 Hz (TREBLE)
S/N ratio (Direct mode): 110 dB (LINE, IHF-A, 0.5 V input)
	80 dB (PHONO, IHF-A, 5 mV input)
Speaker impedance:	4–16 Ω

General

Power supply:	American model: AC 120 V, 60 Hz
	Australian model: AC 230–240 V, 50 Hz
Power consumption:	American model: 9.0 A
	Australian model: 670 W
Standby power
consumption:	2.5 W
Dimensions
(W x H x D):	17-1/8" x 6-7/8" x 18-1/8"
	(435 x 175 x 460 mm)
Weight:	40.8 Ibs. (18.5 kg)

■Video Inputs

Component video inputs:2		(Input 1, Input 2)
S-Video inputs:	6	(DVD, Video 1–5)
Video inputs:	6	(DVD, Video 1–5)

■Video Outputs

Component video
outputs:	1	(Component Monitor Out)
S-Video outputs:	3	(Video 1 Out, Video 2 Out, Video
	Monitor Out)
Video outputs:	4	(Video 1 Out, Video 2 Out, Video
	Monitor Out, Zone 2 Video Out)

Video Section

Input sensitivity, output

level and impedance: 1.0 Vp-p/75 Ω (component and S-Video Y)

0.7Vp-p/75 Ω (component PB/CB, PR/CR) 0.286 Vp-p/75 Ω (S-Video C)

1.0Vp-p/75 Ω (composite)

Component video
frequency response:	5 Hz–50 MHz

Tuner Section

■FM

Tuning frequency range: 87.5–108.0 MHz

Usable sensitivity:	FM STEREO 17.2 dBf, 2.0 µV (75 Ω
	IHF)
	FM MONO 11.2 dBf, 1.0 µV (75 Ω IHF)
S/N ratio:	FM STEREO 70 dB (IHF-A)
	FM MONO 76 dB (IHF-A)
THD:	FM STEREO 0.3%
	FM MONO 0.2%
FM stereo separation:	45 dB at 1 kHz, 30 dB at 100 Hz–10 kHz

■AM

Tuning frequency range: 530–1710 kHz (American model)

	522–1611 kHz (Australian model)
Usable sensitivity:	30 µV
S/N ratio:	40 dB
THD:	0.7%

■Audio Inputs

Digital inputs:	8 (Optical 1–4, Optical Video 5 (fixed, on
	front panel), Coaxial 1–3)
Analog inputs:	9 (CD, Phono, Tape, DVD, Video 1–4,
	Video 5)
Multichannel analog	7.1 ch (Front L/R, Center, Surround L/R,
inputs:	Surround Back L/R, Subwoofer)

■Audio Outputs

Digital outputs:	2 optical
Analog outputs:	4	(Tape Out, Video 1 Out, Video 2 Out,
	Zone 2 Out)
Pre outs:	8	(Front L/R, Center, Surround L/R,
	Surround Back L/R or Zone 2 L/R,
	Subwoofer)
Subwoofer pre out:	1
Speaker outputs:	7
Phones:	1

■Other Sockets

RS-232:	1
IR in/out:	1
12V trigger out:	3
Ethernet (Net-Tune)	1 (10Base-T, RJ45)

Specifications and features are subject to change without notice.

103