Integra DTR-8.4 Basic Setup—Continued, Speaker Configuration, The main menu appears onscreen

DTR-8.4_En.book Page 41 Thursday, October 16, 2003 11:09 AM

Basic Setup—Continued

Speaker Configuration

3

This section explains how to specify which speakers are connected and their sizes.

For speakers with a cone diameter over 6-1/2 inches (16 cm), specify large, and for those with a diameter below this, specify small.

If you’re using THX-certified speak-
ers, specify Small for all speakers.	Cone diameter

	4
1
2, 3
2–9
1, 10	5

1	Press the scroll wheel, and then
	press the [Setup] button.
	The main menu appears onscreen.

6

2 Use the Up/Down []/[ ] but- tons to select “1. Speaker Setup,” and then press the [Enter] but- ton.

The Speaker Setup menu appears.

Use the Up/Down []/[ ] but- tons to select “1. Speaker Con- fig,” and then press the [Enter] button.

The Speaker Config menu appear.

Advanced Menu

1.Speaker Setup

1-1.Speaker Config

a.Subwoofer	:Yes
b.Front	:Small
c.Center	:Small
d.Surround	:Small
e.Surr Back	:Small
f.Crossover:80Hz(THX)
	Quit:SETUP

Use the Up/Down []/[ ] but- tons to select “a. Subwoofer,” and then use the Left/Right []/ [ ] buttons to select:

Yes: Select if a subwoofer is con- nected.

No: Select if no subwoofer is con- nected.

Use the Up/Down []/[ ] but- tons to select “b. Front,” and then use the Left/Right []/[ ] but- tons to select:

Small: Select if the front speakers are small.

Large: Select if the front speakers are large.

Note:

•If the Subwoofer setting in step 4 is set to No, this setting is fixed at Large.

Use the Up/Down [ ]/[	] but-
tons to select “c. Center,” and
then use the Left/Right [	]/[ ]
buttons to select:

Small: Select if the center speaker is small.

Large: Select if the center speaker is large.

None: Select if no center speaker is connected.

Note:

•If the Front setting in step 5 is set to Small, the Large option cannot be selected.

41