Adding Detergent and Rinse Agent (continued)
Rinse Agent
Always use a liquid rinse agent, even if your detergent contains a rinse agent or drying additive, to achieve proper drying and proper maintenance of your dishware and dishwasher.
The control display will indicate “Refill Rinse Agent” when the cup needs filling. After rinse agent is added, “Refill Rinse Agent” will disappear.
Filling the Detergent and Rinse Agent Dispenser
The detergent and rinse agent dispenser can be filled from two positions: the lowered position, with the dishwasher door fully open or the raised position, from a more comfortable posture with the dishwasher door
Filling the Rinse Agent Dispenser
(Lowered Position)
1.Press the blue release button as shown in Figure 23 and lift the cover.
Figure 23
2.Add liquid rinse agent to the dispenser as shown in Figure 24a until the rinse agent reservoir is full.
Filling the Detergent Dispenser
(Lowered Position)
Figure 24
1.Fill the detergent cup as recommended in Table 1.
2.Slide the cover as shown in Figure 21, arrow 1 and press down firmly as shown in Figure 21, arrow 2 so that the cover snaps shut.
Figure 21
Opening the Detergent Dispenser Cover
(Lowered Position)
NOTE: Pressing down on the blue release tab will not open the cover.
1.Press the blue release tab into the dispenser as shown in Figure 22.
a
b
3. Return the rinse agent dispenser cover to its |
shut position and press it firmly so that it |
snaps shut. |
NOTE: Figure 24b represents a completely |
empty rinse agent reservoir. |
4. Refill the rinse agent dispenser when the |
rinse agent reservoir level indicator as |
shown in Figure 24b begins to show a silver |
background with black lines or when the |
“Refill Rinse Agent” indicator appears on the |
dishwasher control panel. |
NOTE: After the rinse agent reservoir is filled |
and the dishwasher door is shut, within a few |
2. The cover will slide open to the left.
Figure 22
minutes the “Refill Rinse Agent” indicator will |
turn off. |
14