Care and cleaning
The advice and warnings contained in this section aim to guide you in cleaning and maintaining the hob, so that it is kept in the best possible condition
Hob
Cleaning
Clean the hob after each use. This prevents food remains left on the surface from burning. Wait until the hob is cold enough before attempting to clean it.
Only use cleaning products specifically designed for glass- ceramic hobs. Follow the instructions provided on the packaging.
Do not use:
■Abrasive products
■
■Pads that may scratch
■
Glass scraper
Remove
1.Release the scraper safety catch
2.Use the blade to clean the hob surface
Do not attempt to clean the hob surface with the base of the scraper. This could result in scratching.
ã=Risk of injury!!
The blade is extremely sharp. Risk of cuts. Protect the blade when not in use. Replace the blade immediately when any imperfections are found.
Care of the appliance
Apply an additive to protect and preserve the hob. Follow the advice and warnings provided with the product.
Hob frame
In order to avoid damage to the hob frame, follow the indications below:
■Use only slightly soapy hot water
■Do not use sharp or abrasive products
■Do not use a glass scraper
Fixing malfunctions
Malfunctions are commonly due to small details. Before calling the Technical Assistance Service, you should consider the following advice and warnings.
Indicator | Malfunction | Solution |
none | The electric power supply has been inter- |
| rupted. |
| The appliance has not been correctly con- |
| nected according to the connection dia- |
| gram. |
Use other electrical appliances to check whether there has been a power cut.
Check that the appliance has been connected correctly according to the connection diagram.
| Electronic system malfunction. | If the above checks do not resolve the malfunction, contact the Tech- |
|
| nical Assistance Service. |
“ flashes | The control panel is damp or an object is | Dry the control panel area or remove the object. |
| resting on it. |
|
Ҥ + number / | Electronic system malfunction. | Turn the hob off from the mains. Wait 30 seconds or so and switch it |
š + number / |
| back on.* |
¡ + number / |
|
|
|
|
|
”‹/”Š | There is an internal error in the operation. | Turn the hob off from the mains. Wait 30 seconds or so and switch it |
|
| back on.* |
”ƒ | The electronic system has overheated and |
| the corresponding hotplate has been |
| switched off. |
Wait for the electronic system to cool down. Then push any symbol on the hob.*
”… | The electronic system has overheated and |
| all the hotplates have been switched off. |
” ‰ | The hotplate has been working |
| too long at a high power level. |
The automatic time stop has been activated. Press any symbol on the control panel. The indicator goes out. The hob may now be switched back on.
Incorrect supply voltage, outside normal | Please contact the local electricity board. | |
| operating limits. |
|
Wait until the electronic system has cooled down sufficiently before switching the hotplate back on.
*If the indication persists, call the Technical Assistance Service.
Do not rest hot pans on the control panel.
10