After switching the programme dial to 0, press the Start/Pause button and hold it down.
While the start button is held down, press the On/Off button to switch the machine on (2).
Keep Start/Pause keys held down until the monitor lights illuminate (2).
After lights ‘Wash/Dry/End’ have flashed (3), release the Start/Pause button (2).
Your machine displays the latest entered water setting.
You can adjust the levels by pressing the Start/Pause button (2) according to the table of hardness settings above.
After adjusting the water hardness level, press on/off to save the settings in memory
Detergent Use
Only use a detergent that is specifically designed for domestic dish washers. Detergent should be put into the compartment located on the inside of the door in prior to starting the machine. Do not overfill the detergent department or this may damage your dishes. For more information regarding the use of detergent, contact the detergent manufacturer.
Filling the detergent compartment
Push the latch to open the detergent container as shown in image 1. Insert either a dishwasher tablet or powder detergent into the larger of the 2 compartments (b). If you are washing
For Customer Services, Spare Parts & Manufacturer's Warranty Information please call 01204 664 084