-Not enough detergent is being used.
-Rinse aid setting is too low.
-Salt is needed due to hard water
-Water softener setting at low level.
-Salt compartment cap not closed properly.
Dishes won’t dry
-A programme without a dry operation has been selected.
-Rinse aid dosage set too low.
-Dishes unload too fast.
Rust stains are present on dishes
-High rate of salt in water.
-Salt compartment cap not closed properly.
-Too much salt spilt into the sides and into the machine while filling with salt.
-Unhealthy mains grounding.
If you having continuing issues after exploring possible solutions given please
contact the number at the bottom of the page for further advise.
For Customer Services, Spare Parts & Manufacturer's Warranty Information please call 01204 664 084