Russell Hobbs RHSLDW1 Maintenance and cleaning, Oil and lime accumulation, Machine door seal

Page 22

Maintenance and cleaning

Cleaning the machine regularly will prolong the machines service life.

Oil and lime accumulation

If oil and lime accumulate in the machine, run the machine empty while ensuring the use of a dishwasher tablet/detergent.

Machine door seal

Use a damp cloth to wipe residues on the door seals regularly. This will prolong the life of the door seal.

Cleaning the machine

Unplug the machine before cleaning. Clean the filters and spray arms at least once a month to prevent blockages. Do not use strong detergents when cleaning your machine, wipe with a mild detergent and damp cloth.

Filters

Check the fine filters for potential food waste deposits. If any food waste is present, remove the filter and rinse thoroughly under a tap.

a.Micro Filter

b.Coarse Filter

c.Metal/Plastic filter

To remove and clean the filter, turn anti-clockwise and take it out by lifting upwards (1).

Pull and remove the metal/plastic filter (3). Then pull the coarse filter out of the micro filter (2). Rinse this with water under a tap and refit the metal filter. Insert the coarse filter into the micro

For Customer Services, Spare Parts & Manufacturer's Warranty Information please call 01204 664 084 -22-

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Slimline Dishwasher Contents Standard Loading Components Control Panel EC declaration of conformity Technical SpecificationSafety Information RecyclingWhen installing your machine Safety informationDaily Use Items not suitable for dishwashing Installing the machinePositioning the machine Water inlet hose Water ConnectionWater outlet hose Electrical Connection Water Before using the machineFilling with salt Testing Strip Adjusting salt consumption Detergent Use Filling the detergent compartmentCombined Detergents Rinse AidLoading your dishwasher Top basket height adjustmentDish rack Examples of loading Lower Basket Upper Basket Incorrect LoadsStandard Loading CapacityProgramme Options Using the machine Switching the machine off Important informationOil and lime accumulation Maintenance and cleaningCleaning the machine Machine door sealSpray arms Hose filterProgramme won’t start Error Codes‘Wash/Dry’ and ‘End’ keep flashing Water will not drain Control lamps illuminated after cycle has finishedDetergent residues are left in the detergent compartment Machine stops during cycleDishes won’t dry Rust stains are present on dishes01204 664
Top Page Image Contents