Grundig UMS 4600 DEC manual Creating a track memory

CD MODE ________________________________________________________

Creating a track memory

You can create a track memory of up to 64 files on different albums (MP3) or up to 64 tracks (CD-DA) for the current CD in any order you choose and then play them back in that sequence. A file or track may be stored more than once. Programming is only possible in stop mode.

Selecting and storing files (MP3 only)

1Press »PROGRAM« to call up the function.

–Display: »P-0 I «, the file display »000« and »PROGRAM«, the album display »00« flash.

2Select the desired album with »5a« or »s6« and confirm with »PROGRAM«.

–Display: the file display »000« flashes.

3Select the desired file with »5a« or »s6« and save with »PROGRAM«.

–Display: »P-0 2 «, the file display »000« and the album display »00« flash.

4To store more tracks, repeat steps 2 to 3.

Selecting and saving tracks (CD-DA only)

1Press »PROGRAM« to call up the function.

–Display: »P-0 I «, the track display »00« and »PROGRAM«.

2Select the desired track with »5a« or »s6« and save with »PROGRAM«.

–Display: »P-0 2 « and the track display »00«.

3To store more tracks, repeat step 2.

Playing back a track memory

1Start the track memory by pressing »￿ II«.

–Display: »PROGRAM«.

–Playback begins with the first programmed track.

2Press »STOP 7« to end playback.

3To play the track memory again, press »PROGRAM« and afterwards »￿ II«.

Checking the track memory

1Press »PROGRAM« repeatedly when the in stop mode.

– The sequence of the stored files or tracks is displayed.

Deleting the track memory

1In track memory mode, press »7«; or

open the CD compartment with »OPEN/CLOSE« on the device.

ENGLISH

23