Panasonic NE-2146 Programmed Heating, Programming NUMBER/MEMORY Pads -- single stage heating

Page 12

How to Operate NE - 2156/NE - 1856/NE - 1456

B. PROGRAMMED HEATING

◆In Program Unlock Mode:

Example: To select Number/Memory pad “3” at A side in which your desired heating program (at HIGH power for 3 min., single stage heating) is set

	PAD	INSTRUCTION	DIGITAL DISPLAY WINDOW
1		Open the door and put the food in the oven.
		☛ The oven lamp will turn on and “0” will appear.
		Note: While “0” appears, operation is available. One minute after the door
		is closed, “0” will disappear.
2	3	Press the desired Number/Memory pad “3”.	PROG
			PROG
		☛ The currently programmed information will be indicated.	1
			1
3		Press Start pad.	PROG
		☛ The oven lamp will turn on and heating will start. The heating time will	1
		count down.	1
		count down.
•	When all time expires, beep tone will sound and heating will stop. The oven lamp will
	turn off. “0” will blink until the door is opened. One minute later, cooling fan will stop.
•	Open the door and take the food out. The oven lamp will turn on.
•	Close the door. The oven lamp will turn off. One minute later, Digital Display Window will
	go blank.

Note:

•When you want to select the number at B side, press Shift (A/B) pad before pressing the desired Number/Memory pad.

◆In Program Lock Mode:

Just press the desired Number/Memory pad. Heating will automatically start without pressing Start pad.

◆For Double (or Treble) Quantity heating:

Press Double x 2 (or Treble x 3 ) Quantity pad before pressing the desired Number/Memory pad.

C. PROGRAMMING NUMBER/MEMORY PADS –– single stage heating ––

THE OVEN CAN NOT BE PROGRAMMED WHEN PROGRAM LOCK IS ACTIVATED! (see page 13-14)

DO NOT OPEN THE DOOR WHILE PROGRAMMING!

Example: To program cooking at DEFROST power for 1 minute into Number/Memory pad “5”

1

2

PAD	INSTRUCTION	DIGITAL DISPLAY WINDOW

Keep the door closed.

☛Digital Display Window must be blank.

Press Program pad.

PROG

☛“PROG” will start to blink.

- 11 -

Image 12

Contents Operating Instructions 2100/1800/1400 Watts Microwave OvenTable of Contents For Your Safety Placement of Your Oven Using Your OvenMaintenance of Your Oven Important Safety Instructions -- Read Carefully Never Operate Oven Without FoodKeeping Your Oven Clean ReheatingStanding Time ContainersHow Does the Microwave Work? ReflectionOutline Diagram NE 2146/NE How to Operate NE 2146/NEPAD Instruction Open the door and put the food in the ovenOutline Diagram NE 2156/NE 1856/NE This oven is preset at the factory for the followingHow to Operate NE 2156/NE 1856/NE Press Power Level Selector pad onceManual Heating -- single stage heating Press Number/Memory pads 2, 0Repeat Feature Manual Heating -- 2 or 3 stages heatingPress Number/Memory pads 1, 0 Special Note For both single and 2 stages heatingProgram Unlock Mode Program Lock ModeProgrammed Heating Programming NUMBER/MEMORY Pads -- single stage heatingProgramming NUMBER/MEMORY Pads -- 2 or 3 stages heating Press Number/Memory padFollow steps 1 to 5 above Press Prog padProgramming Double or Treble Quantity PAD Program LockTo Activate Program Lock Beep Tone To Release Program LockTo Select Loudness Level and Length 3 beeps Program List Cycle CounterTo Read The Number of Times Each Memory Pad Has Been Used Do not Close the DoorAIR Filter To Read Total Cumulative Cycles That The Oven Has Been UsedTo check the total number of hours used Installation Instructions for Stacking Self Diagnostics Failure Code ExplanationInstallation Code Problem What to doCleaning Splatter Shield Cleaning AIR FilterCare of Your Microwave Oven Cooking Instructions CookwareDefrosting Frozen Foods Other Helpful InstructionsHeating Foods from Refrigerated Temperature Heating Foods from Room TemperatureMicrowave Basics Important RecommendationsCooking/Defrosting Guide Technical Specifications NE-1456 NE-1856 / NE-1846 NE-2156 / NE-2146NE-1456 / NE-1856 / NE-2156 NE-1846 / NE-2146