How to Operate NE - 2156/NE - 1856/NE - 1456
3 |
| 5 |
| Press Number/Memory pad “5”. | PROG |
|
|
| ☛ The selected pad number will appear and currently programmed | 1 | |
|
|
|
| information will be indicated. | |
4 |
|
|
| Press Power Level Selector pad three times. | PROG |
|
|
|
| ☛ The selected power level will be indicated, 1st Stage Heating Indicator | 1 |
|
|
|
| “1” will start to blink, and Heating Time Display will go blank. | |
|
|
|
|
| |
5 | 1 | 0 | 0 | Press Number/Memory pads “1”, “0” and “0”. | PROG |
| ☛ The set heating time will appear. |
| |||
|
|
|
| 1 | |
|
|
|
| Note: up to 15 min. on HIGH or MEDIUM power, 30 min. on DEFROST | |
|
|
|
|
| |
6 |
|
|
| Press Program pad. | PROG |
|
|
|
| ☛ “PROG” and 1st Stage Heating Indicator “1” will stop blinking. | 1 |
|
|
|
| This means that you have completed programming. | |
|
|
|
|
|
• Three seconds later, Digital Display Window will go blank.
Note:
•Program the remaining Number/Memory pads as desired by repeating steps
•When “PROG” is blinking in Digital Display Window, the program can be cancelled and/or one touch on Stop/Reset pad erases the programmed Number/Memory pad number.
•When you want to program the B side, press Shift (A/B) pad before selecting the desired Number/Memory pad.
C. PROGRAMMING NUMBER/MEMORY PADS –– 2 or 3 stages heating ––
THE OVEN CAN NOT BE PROGRAMMED WHEN PROGRAM LOCK IS ACTIVATED! (see page
DO NOT OPEN THE DOOR WHILE PROGRAMMING!
Example:To program cooking at DEFROST power for 1 minute and at HIGH power for 2 minutes into Number/Memory pad “5”
|
| PAD |
| INSTRUCTION | DIGITAL DISPLAY WINDOW |
|
|
|
| Follow steps 1 to 5 above. | PROG |
|
|
|
|
| 1 |
6 |
|
|
| Press Power Level Selector pad once. | PROG |
|
|
|
| ☛ The power level for 2nd stage will be indicated, 2nd Stage Heating | 1 2 |
|
|
|
| Indicator “2” will start to blink, and Heating Time Display will go blank. | |
|
|
|
|
| |
7 | 2 | 0 | 0 | Press Number/Memory pads “2”, “0” and “0”. | PROG |
| ☛ The set heating time will appear. |
| |||
|
|
|
| 1 2 | |
|
|
|
| Note: up to 15 min. on HIGH or MEDIUM power, 30 min. on DEFROST | |
8 |
|
|
| Press Prog pad. | PROG |
|
|
|
| ☛ “PROG” and 2nd Stage Heating Indicator “2” will stop blinking. The |
|
|
|
|
| total time for both stages will appear. This means that you have | 1 2 |
|
|
|
| completed programming. |
|
• Three seconds later, Digital Display Window will go blank.
Note:
•Program the remaining Number/Memory pads as desired by repeating steps above.
•When “PROG” is blinking in Digital Display Window, the program can be cancelled and/or one touch on Stop/Reset pad erases the programmed Number/Memory pad number.
•When you want to program the B side, press Shift (A/B) pad before pressing Number/Memory pad.
- 12 -