Panasonic NE-1846, NE-1856, NE-2146, NE-2156 Program List, Cycle Counter, Do not Close the Door

Page 16

How to Operate NE - 2156/NE - 1856/NE - 1456

◆For selecting length of tone “short beeps for 60 seconds”:

Example: To select short beeps for 60 seconds

5

6

PAD	INSTRUCTION	DIGITAL DISPLAY WINDOW
	Follow step 1-4 on page 14.	PROG
	DO NOT CLOSE THE DOOR!	1
		1
0	Within three seconds after pressing Prog pad at step 4, press	PROG
0	Number/Memory pad “0” once.	2
	☛ “PROG” will start to blink and 2nd Stage Heating Indicator “2” (the	2

	length of beep tone “short beeps for 60 seconds”) will be indicated.
	Press Prog pad.	PROG
	☛ “PROG” will stop blinking. This means that you have completed	2
	programming.	2
	programming.
	Three seconds later, “0” will appear.

• Close the door. One minute later, Digital Display Window will go blank.

G. PROGRAM LIST

1

2

PAD	INSTRUCTION	DIGITAL DISPLAY WINDOW

Open the door and leave it open.

☛ The oven lamp will turn on and “0” will appear.

+	While pressing Stop/Reset pad, press Start pad.	e.g.
	☛ All currently programmed information (the program set into each	PROG

	Number/Memory pad (A/B sides), Beep Tone, and Program Lock	1
	information) will continuously appear.
		PROG

1

PROG

2

PROG

H. CYCLE COUNTER

◆To Read The Number of Times Each Memory Pad Has Been Used:

Example: To read times of Number/Memory pad “3” at A side (6666 times used)

	PAD	INSTRUCTION	DIGITAL DISPLAY WINDOW

1		Open the door and leave it open.

☛ The oven lamp will turn on and “0” will appear.

2		3	While pressing Stop/Reset pad, press Number/Memory pad “3”.	e.g.
2	+		While pressing Stop/Reset pad, press Number/Memory pad “3”.
	+		☛ The times that the pressed Number/Memory pad has been used will
			appear.

Note:

•When you want to read the times of each pad at B side, press Shift (A/B) pad while the display is still showing the number of cycles in step 2.

- 15 -

Image 16

Contents Operating Instructions 2100/1800/1400 Watts Microwave OvenTable of Contents For Your Safety Using Your Oven Placement of Your OvenMaintenance of Your Oven Important Safety Instructions -- Read Carefully Never Operate Oven Without FoodKeeping Your Oven Clean ReheatingStanding Time ContainersHow Does the Microwave Work? ReflectionOutline Diagram NE 2146/NE How to Operate NE 2146/NEPAD Instruction Open the door and put the food in the ovenOutline Diagram NE 2156/NE 1856/NE This oven is preset at the factory for the followingHow to Operate NE 2156/NE 1856/NE Press Power Level Selector pad onceManual Heating -- single stage heating Press Number/Memory pads 2, 0Repeat Feature Manual Heating -- 2 or 3 stages heatingPress Number/Memory pads 1, 0 Special Note For both single and 2 stages heatingProgram Unlock Mode Program Lock ModeProgrammed Heating Programming NUMBER/MEMORY Pads -- single stage heatingProgramming NUMBER/MEMORY Pads -- 2 or 3 stages heating Press Number/Memory padFollow steps 1 to 5 above Press Prog padProgram Lock Programming Double or Treble Quantity PADTo Activate Program Lock To Release Program Lock Beep ToneTo Select Loudness Level and Length 3 beeps Program List Cycle CounterTo Read The Number of Times Each Memory Pad Has Been Used Do not Close the DoorTo Read Total Cumulative Cycles That The Oven Has Been Used AIR FilterTo check the total number of hours used Installation Instructions for Stacking Self Diagnostics Failure Code ExplanationInstallation Code Problem What to doCleaning AIR Filter Cleaning Splatter ShieldCare of Your Microwave Oven Cooking Instructions CookwareDefrosting Frozen Foods Other Helpful InstructionsHeating Foods from Refrigerated Temperature Heating Foods from Room TemperatureMicrowave Basics Important RecommendationsCooking/Defrosting Guide Technical Specifications NE-1456 NE-1856 / NE-1846 NE-2156 / NE-2146NE-1456 / NE-1856 / NE-2156 NE-1846 / NE-2146