Panasonic NE-2156, NE-1856 Outline Diagram NE 2146/NE, How to Operate NE 2146/NE, PAD Instruction

Page 8

Outline Diagram

NE - 2146/NE - 1846

(3)

(4)(5)

(1)

Digital Display Window (see below)

(2)

Power Level Indicator Display

(1)

 

 

 

 

(3)

Power Level Selector Buttons

 

 

 

(4)

Timer Dial

(2)

 

 

(5)

Start Button

 

 

(6)

Door Handle

(7)

 

 

(7)

Oven Lamp Cover

 

 

(9)

(8)

Air Filter

 

 

(9)

Splatter Shield (top of inner cavity)

 

 

 

 

A

(6)

 

 

 

 

 

 

 

 

B

 

 

 

A –– Heating Time Display (min. sec.)

 

 

 

B –– Power Level Indicator

 

(8)

 

 

: HIGH

 

 

 

 

: MEDIUM

 

 

 

 

: DEFROST

How to Operate NE - 2146/NE - 1846

Example: To cook food at MEDIUM power for 4 minutes

1

2

3

4

PAD

INSTRUCTION

DIGITAL DISPLAY WINDOW

 

 

 

Open the door and put the food in the oven.

The oven lamp will turn on. “0” and Power Level Indicator will appear.

Note: While “0” appears, operation is available. One minute after the door is closed, “0” will disappear.

Press the desired Power Level Selector Button, if other than (HIGH).

Set heating time.

The heating time will appear in the digital display while turning the Timer Dial.

Note: up to 25 min. on , 30 min. on or

Press Start Button.

The oven lamp will turn on and heating will start. Power Level Indicator will start to blink, and heating time will count down.

When all time expires, beep tone will sound and heating will stop. The oven lamp will turn off. “0” will blink until the door is opened. One minute later, cooling fan will stop.

Open the door and take the food out. The oven lamp will turn on. Digital Display Window will show “0” and Power Level Indicator

Close the door. The oven lamp will turn off. One minute later, Digital Display Window will go blank.

When you press the Start Button with door open, “0” will appear in the display in all cases.

Even after setting the heating time you can still change the power level.

If you wish to change the heating time during heating, simply adjust the timer to desired minutes and seconds.

- 7 -

Image 8
Contents Operating Instructions 2100/1800/1400 Watts Microwave OvenTable of Contents For Your Safety Maintenance of Your Oven Placement of Your OvenUsing Your Oven Important Safety Instructions -- Read Carefully Never Operate Oven Without FoodKeeping Your Oven Clean ReheatingStanding Time ContainersHow Does the Microwave Work? ReflectionOutline Diagram NE 2146/NE How to Operate NE 2146/NEPAD Instruction Open the door and put the food in the ovenOutline Diagram NE 2156/NE 1856/NE This oven is preset at the factory for the followingHow to Operate NE 2156/NE 1856/NE Press Power Level Selector pad onceManual Heating -- single stage heating Press Number/Memory pads 2, 0Repeat Feature Manual Heating -- 2 or 3 stages heatingPress Number/Memory pads 1, 0 Special Note For both single and 2 stages heatingProgram Unlock Mode Program Lock ModeProgrammed Heating Programming NUMBER/MEMORY Pads -- single stage heatingProgramming NUMBER/MEMORY Pads -- 2 or 3 stages heating Press Number/Memory padFollow steps 1 to 5 above Press Prog padTo Activate Program Lock Programming Double or Treble Quantity PADProgram Lock To Select Loudness Level and Length 3 beeps Beep ToneTo Release Program Lock Program List Cycle CounterTo Read The Number of Times Each Memory Pad Has Been Used Do not Close the DoorTo check the total number of hours used AIR FilterTo Read Total Cumulative Cycles That The Oven Has Been Used Installation Instructions for Stacking Self Diagnostics Failure Code ExplanationInstallation Code Problem What to doCare of Your Microwave Oven Cleaning Splatter ShieldCleaning AIR Filter Cooking Instructions CookwareDefrosting Frozen Foods Other Helpful InstructionsHeating Foods from Refrigerated Temperature Heating Foods from Room TemperatureMicrowave Basics Important RecommendationsCooking/Defrosting Guide Technical Specifications NE-1456 NE-1856 / NE-1846 NE-2156 / NE-2146NE-1456 / NE-1856 / NE-2156 NE-1846 / NE-2146