How to Open/Remove
To open, press the depression in the | To remove, push on the lid release lever, | ||
opening lever, and lift the lid. | hold the lid opening lever, and pull the lid | ||
|
|
| out and up diagonally. |
|
| Lid opening lever |
|
|
|
| |
|
|
|
|
Depression
Lid release lever
To close |
| To attach |
Press down on the lid until it clicks. |
| Insert the lid at an angle. |
|
|
|
Overheating Protection
If an empty container is heated, the overheat safety function (which prevents an empty container from being heated) will be activated. The power will be shut off automatically to prevent the problems that may occur due to overheating.
Overheating, the display shows | Cause | |
LEDs flashing alternately | ||
| • | Less than the minimum water level in the |
|
| container was boiled. |
| • | After water is added, the lid might be left open. |
How to cancel the display
Pour water into the container, and
press the | key. |
Notice
If an empty container is heated, an odor will be emitted and the container may be discolored.
Part Names and Handling Instructions
15