Midland Radio SP-300 Removing & Replacing the Battery, Removing & Replacing PTT Assy

MAXON

SP-300 HAND HELD

REMOVING & REPLACING THE BATTERY

To remove the battery:

1.Holding the radio chassis in one hand, press and hold the battery release catch on the upper back of the radio with the other hand.

2.Pull the battery back and away from the radio.

3.Remove the battery from the radio.

To replace the battery:

1.Position the battery on the battery guide rail at the bottom of the radio.

2.Move the top of the battery toward the radio until a click is heard.

REMOVING & REPLACING PTT ASSY.

To remove the PTT assembly:

1.Remove the 2 screws located at the top and bottom of the PTT switch holder housing. This will allow removal of the PTT holder (A) and PTT pad (B).

1

VOL

1 2 3

ANT

		VOL		1
				3
				2
		1	CH	4
		2
	4	3		ANT
CH		ANT
		T

2

Figure 3-Battery Removal

B

A

1

Figure 4-PTT Removal

Page -14- May 2001