Midland Radio SP-300 service manual Removing & Replacing the Back Cover, To remove the Back Cover

MAXON

SP-300 HAND HELD

REMOVING & REPLACING THE BACK COVER

To remove the Back Cover:

1.Remove battery. (Refer to Removing &Replacing the Battery)

2.Unscrew the four Back Cover mounting screws located on the Back Cover of the radio.

VOL

CH

1 2

3 4

ANT

Figure 8-Back Cover Removal & Installation

3.Remove the Back Cover by pulling the lower battery bracket away from the radio.

4.The Back Cover can now be removed by pulling the Back Cover away from the radio chassis. The self forming gasket ring (A) should remain on the Back Cover.

To replace the Back Cover:

1. Reverse the steps taken to remove the Back Cover.

VOL	1
	2
	3
	4
	HC
	ANT

3 A

Figure 8B-Back Cover Removal & Installation

Page -16-

May 2001