Sanyo MBR-704GR Routine Maintenance, Cleaning of cabinet, Cleaning of evaporation tray

Page 19

ROUTINE MAINTENANCE

WARNING

Always disconnect the power supply to the unit prior to any repair or maintenance of the unit in

order to prevent electric shock or injury.

Ensure you do not inhale or consume medication or aerosols from around the unit at the time of maintenance. These may be harmful to your health.

CAUTION

Always wear dry gloves to protect hands at the time of maintenance. Failure to wear gloves may result in injury from edges and corners.

Cleaning of cabinet

1.Clean the unit once a month. Regular cleaning keeps the unit looking new.

2.Use a dry cloth to wipe off small amounts of dirt on the outside and inside of the unit and all accessories. If the unit is very dirty, use a neutral detergent.

3.After cleaning, wipe away the cleaner completely with a cloth washed in clean water.

4.Never pour water onto or into the unit. Doing so can damage the electric insulation and cause failure.

The compressor and other mechanical parts are completely sealed. This unit requires absolutely no lubrication.

Remove dust from the power supply plug periodically. A dusty plug or improper insertion may pose a hazard.

Cleaning of evaporation tray

This unit is provided with the evaporation tray on the back.

1.Pull the lower side of the tray toward you.

2.Lift the tray upwards to remove the tray from the hook.

3.Take out downwardly.

4.Wash the tray and replace.

Evaporation tray

18

Image 19
Contents MBR-704G MBR-704GR Contents Precautions for Safe OperationSymbol shows Precautions for Safe Operation Prevent electric shock or injury May result Environmental Conditions Refrigerator Components Inner door Upper monitor bottle Lower monitor bottle Inside components of MBR-704G type Inside of front coverControl panel and keypad Installation site InstallationFix the unit InstallationGround earth Preparation of monitor bottle Load line START-UP of UnitStock of containers Exhaust air ventControl panel Operating InstructionsDefrost cycles Temperature sensor calibration procedure Alarm test procedure Alarms & Safety FunctionsRemote alarm terminal Alarms and safety functionsCleaning of cabinet Routine MaintenanceCleaning of evaporation tray Replacement of glow starter Replacement of fluorescent lampDisposal of Unit When the unit does not get cold enough Trouble ShootingIf nothing operates even when switched on Alarm device is activatedPerformance SpecificationsSafety check sheet CEM

MBR-704GR, MBR-704G specifications

The Sanyo MBR-704GR and MBR-704G are standout models in the realm of solar refrigerator technology, designed to provide reliable refrigeration solutions in off-grid environments. These units are particularly popular among outdoor enthusiasts, campers, and people living in remote areas due to their efficient energy consumption and robust performance.

One of the main features of the Sanyo MBR-704GR and MBR-704G is their impressive energy efficiency. Both models are designed to run on solar power, making them an eco-friendly choice for users who want to reduce their carbon footprint. With the ability to connect to solar panels, these refrigerators can be powered by renewable energy, allowing for sustained operation even in areas without access to traditional power sources.

The interior of these refrigerators is thoughtfully designed to maximize storage capacity. With adjustable shelves, users can easily accommodate various sizes of food and drinks. The MBR-704GR version even includes a separate compartment for freezing, maintaining a temperature suitable for long-term food preservation. This versatility makes them ideal for a range of applications, from camping trips to emergency preparedness.

In terms of durability, both models feature robust construction. The exterior casing is designed to withstand the rigors of outdoor use, ensuring that the units can handle bumps and jolts during transport. Additionally, the technology used in these refrigerators is engineered to minimize noise, making them suitable for quiet environments.

Temperature control is another highlight, as both the MBR-704GR and MBR-704G are equipped with an advanced thermostat system. This allows users to set and maintain the desired temperature with precision, ensuring that food and drinks stay at optimal freshness. The powerful compressor technology also plays a critical role in maintaining consistent temperatures while minimizing energy consumption.

Finally, the sleek design of these models not only makes them visually appealing but also ergonomically efficient. The easy-access doors and user-friendly controls enhance the overall experience, allowing for simple operation whether at home or in the great outdoors.

In conclusion, the Sanyo MBR-704GR and MBR-704G are perfect examples of modern solar-powered refrigeration technology. With their energy efficiency, spacious interior, durable construction, precise temperature control, and user-friendly design, they stand out as reliable solutions for those seeking sustainable refrigeration options. Whether used in remote areas or as part of an eco-conscious lifestyle, these refrigerators meet the needs of today's environmentally aware consumers.