Maintenance Daily | Middleby Marshall PS640 specification

SECTION 4 - MAINTENANCE

WARNING

Before ANY cleaning or servicing of the oven, perform the following procedure:

1.Switch off the oven and allow it to cool. Do NOT service the oven while it is warm.

2.Turn off the electric supply circuit breaker(s) and disconnect the electric supply to the oven.

3.If it is necessary to move a gas oven for cleaning or servicing, disconnect the gas supply before moving the oven.

When all cleaning and servicing is complete:

1.If the oven was moved for servicing, return the oven to its original location.

2.If the restraint cable was disconnected to clean or service the oven, reconnect it at this time.

3.Reconnect the gas supply.

4.Reconnect the electrical supply.

5.Turn on the full-flow gas safety valve. Test the gas line connections for leaks using approved leak test substances or thick soap suds.

6.Turn on the electric supply circuit breaker(s).

7.Perform the normal startup procedure.

WARNING

Possibility of injury from moving parts and electrical shock exists in this oven. Switch off and lockout/tagout the electric supply BEFORE beginning to disassemble, clean, or service any oven. Never disassemble or clean an oven with the BLOWER () switch or any other circuit of the oven switched on.

CAUTION

NEVER use a water hose or pressurized steam-cleaning equipment when cleaning this oven. To avoid saturating the oven insulation, DO NOT use excessive amounts of water. DO NOT use a caustic oven cleaner, which can damage the bake chamber surfaces.

NOTE

ANY replacement parts that require access to the interior of the oven may ONLY be replaced by a Middleby Marshall Authorized Service Agent. It is also strongly recommended that the 3-Month Maintenance and 6-Month Maintenance procedures in this section be performed ONLY by a Middleby Marshall Authorized Service Agent.

I. MAINTENANCE - DAILY

Figure 4-1. Cooling Vents and Grills

A.Check that the oven is cool and the power is discon- nected, as described in the warning at the beginning of this Section.

B.Clean ALL of the cooling fan grills and vent openings with a stiff nylon brush. Refer to Figure 4-1 for the locations of the grills and vents.

C.Clean the outside of the oven with a soft cloth and mild detergent.

D.Check that ALL cooling fans are operating properly.

CAUTION: If a cooling fan is not operating correctly, it must

be replaced IMMEDIATELY. Operating the oven without adequate cooling can seriously damage the oven's internal components.

E.Clean the conveyor belts with a stiff nylon brush. This is more easily accomplished by allowing the conveyor to run while you stand at the exit end of the conveyor. Then, brush the crumbs off the conveyor as it moves.

F.Remove and clean the crumb trays. If necessary, refer to Figure 2-16 (in Section 2, Installation) when replacing the crumb trays into the oven.

G.Clean the window in place.

Vents on front panel

of oven

Fan grills (2) on rear	Vent (1) on rear
of oven and control	of machinery
compartment	compartment

PS640 specifications

The Middleby Marshall PS640 is an industry-leading conveyor oven designed to meet the demands of commercial kitchens, particularly in pizza and other high-volume food applications. This oven combines advanced technologies with robust design, ensuring that users achieve consistent, high-quality results while optimizing operational efficiency.

One of the standout features of the PS640 is its unique design, which includes a patented jet impingement technology. This technology significantly enhances the cooking efficiency by using high-velocity hot air to cook food evenly and quickly. This not only reduces cooking times but also helps retain moisture and flavor, resulting in a superior product that delights customers.

Another key characteristic of the PS640 is its dual-mode operation. The oven can be configured for either high-speed cooking or traditional baking modes, making it versatile enough to handle a wide variety of menu items. This flexibility allows operators to maximize their kitchen space and adapt to changing customer demands effortlessly.

The PS640 also boasts a fully insulated cooking chamber, which ensures consistent cooking temperatures and minimizes energy loss. This thermal efficiency not only contributes to food quality but also helps reduce operational costs, making it an economically viable option for restaurants and foodservice operations.

Further enhancing its user-friendliness, the PS640 features an intuitive digital control panel. This allows staff to easily set cooking times and temperatures, monitor performance, and make adjustments as necessary. Additionally, the oven includes programmable cooking settings, making it easy to replicate popular dishes quickly and ensuring consistency across multiple shifts.

Durability is another hallmark of the PS640. Constructed with high-quality materials, this oven is built to withstand the rigors of a busy kitchen environment. Its stainless-steel exterior not only gives it a sleek look but also makes it easy to clean and maintain.

In summary, the Middleby Marshall PS640 is a state-of-the-art conveyor oven that excels in speed, efficiency, and versatility. Its advanced technologies, user-friendly features, and robust construction make it an ideal choice for foodservice operators looking to elevate their cooking capabilities and enhance their menu offerings. Whether for quick-service restaurants, pizzerias, or catering operations, the PS640 delivers outstanding results with every use, ensuring satisfied customers and a thriving business.