Bosch Appliances MUM 7400 UC Placing into Operation w/Twin Beating Whisks, Removing Contents

3.Place and engage the twin beating whisk assembly on the driveshaft of the mixing bowl as shown in figure 8a.

Figure 8.

4.Place the anti-splash cover on the bowl so that the tabs on the bowl fit into the recesses in the cover, and turn the anti- splash cover counterclockwise to fasten the bowl cover to the bowl.

The anti-splash cover has an integral filling funnel with a cap. The cap may be removed to add ingredients, as shown in figure 8b, but the cover and cap should be in place whenever the power unit is in operation. The anti-splash cover and cap serve to prevent the escape of flour dust at the beginning of the stirring process, as well as prevent splatter, and also serves to prevent accidental contact with the moving whisks.

Placing into Operation w/Twin Beating Whisks

Make sure that the switch is in the Off position, “O/Off.” Unwind the electrical cord to the necessary length and plug into the wall outlet. The bowl with whisk assembly is now ready for operation. See table 1 for examples demonstrating the use of the twin beating whisks.

Mixing bowl tips:

1.When using the mixing bowl to knead or mix a recipe designed to be prepared by hand, you will find that with the Bosch Kitchen Machine you can usually place all the ingredients in the mixing bowl at once. When doing this, always place the liquids in first. This will assure more thorough mixing.

2.When adding ingredients to a mixture:

a.Turn the rotary switch to a lower speed

b.Remove the cap from the filling funnel

c.Add the ingredients through the funnel opening and replace the cap

3.If a large batch of dough is to be left in the mixing bowl and allowed to rise, the cover should be removed and placed only loosely on the bowl so that it is free to move if the dough should begin to press on it.

Removing Contents

Before beginning to remove the contents from the mixing bowl, make sure that the power unit has been turned to the Off position, “O/Off.” Remove the anti-splash cover by turning the cover clockwise and lifting off. Once the cover has been removed, the dough hook or the twin beating whisks may be removed by turning the hook or whisk assembly clockwise while lifting.

The mixing bowl can be removed from the power unit by turning the bowl clockwise while lifting.

The contents may now be used as desired.