How to Use Dough Hook

whisks during operation to prevent injury and/or damage to the power unit or accessories.

3.Always work with the bowl lid fitted in place.

4.Do not change tools until the power unit has come to a complete stop; when switched Off, the power unit will continue to turn for a brief period.

The mixing bowl with dough hook and twin beating whisks consists of the following components, see figure 3:

The dough hook and mixing bowl are intended to be used to knead yeast doughs and to mix cookie and pastry doughs, and also when adding nuts, chocolate chips, dried fruit, hard butter or shortening, hardened brown sugar, etc. to batters.

Use of mixing bowl with dough hook

Before beginning to attach this or any other attachment, make sure that the power unit is on a smooth, clean, suitable work surface and switched to the Off position, “O/Off,” and that you have removed the motor drive cover.

1.Before using the mixing bowl and dough hook for the first time, it is recommended that the bowl, anti-splash cover, filling funnel cap and dough hook be washed. All components of the mixing bowl and the dough hook are dishwasher safe. Or they may be washed in warm soapy water. After washing, rinse well and dry before using.

The driveshaft can be removed for cleaning by pushing down on the shaft, as shown in figure 4a. After washing, rinse and dry the driveshaft and replace in the bowl by pressing it in, from the bottom, as shown in figure 4b, until it snaps into place.

Figure 3.

4a. Stainless steel bowl with anti- splash cover and filling funnel cap

4b. Dough hook

4c. Twin beating whisks

Figure 4.