Figure 17.
2.To assemble the slicer/shredder:
a.Place slicer/shredder bowl on the power unit by placing over the high- torque drive and, while pressing down, turn it counterclockwise to stop and lock the bowl in place, see figure 17b.
c.Select disc to be used and place on disc holder and place over driveshaft, see figure 18a.
d.Then place cover on bowl, making sure the tabs on the cover enter the recesses in the bowl, and turn counterclockwise to stop, see figure 18b.
Figure 18.
Placing Slicer/Shredder into Operation Make sure the power unit is on a smooth, clean, suitable work surface and switched to the Off position, “O/Off.” Unwind the electrical cord to the necessary length and plug into a convenient outlet. The slicer/ shredder is now ready for use.
Place items to be sliced, shredded or grated in feeding funnel and be sure to use the pusher to feed items into the discs when in operation.
Learning how to feed food properly into the feed funnel is the most important factor for proper slicing and grating:
1.For long slices or long shreds, place food into the feeding funnel lengthwise.
2.For short or circular slices, place food in the feeding tube on end. For example, if you wish to have circular slices of zucchini or carrots:
•cut to length not to extend above the top of the feeding tube.
•place the cut zucchini or carrots in the feeding tube on end until the feeding tube is packed.
To slice a single narrow item, a carrot for example:
•place the carrot in the feeding funnel opposite the cutting edge of the disc.
The wall of the feeding funnel will then serve to hold the piece vertical.
When using the slicer/shredder be sure to watch the level in the bowl and stop the slicing, shredding or grating before the level of the material being sliced, shredded or grated reaches the level of the disc holder.
Slicer/shredder tips:
1.Shopping for fruits and vegetables that will fit into the feeding funnel will simplify food preparation.
19