CAUTION
Failure to make sure that the bowl is properly seated on the drive coupling before the power unit is turned On can result in damage to the bowl and/or coupling.
Figure 21.
3.Engage the dough hook on the drive pin by placing it in bowl, as shown in figure 21b, and turning the dough hook clockwise while pushing down until it stops.
Figure 22.
4.Place the splash ring on the bowl, making sure the tabs on the bowl fit into the recesses in the splash ring, and turn counterclockwise, see figure 22a. Then place the cover on the splash ring so that the tabs on the splash ring fit into the recesses in the bowl cover and turn the cover counterclockwise to fasten the bowl cover to the bowl. See figure 22b.
The splash ring and cover should be in place whenever the power unit is in operation. The splash ring and cover serve to prevent the escape of flour dust at the beginning of the stirring and kneading process, and also serves to prevent accidental contact with the moving dough hook.
Placing into Operation w/Dough Hook
Make sure that the power unit is on a smooth, clean, suitable work surface and switched to the Off position, “O/Off.” Unwind the electrical cord to the necessary length and plug into a convenient outlet. The mixing bowl with dough hook is now ready for operation. See table 1 for examples demonstrating the use of the dough hook attachment. Sample recipes may also be found in the recipe section, at the back of this manual.
Removing Contents
Before beginning to remove the contents from the stainless steel bowl, make sure that the power unit has been turned to the Off position, “O/Off.” Remove the cover and splash ring by turning clockwise and lifting off. Once the cover and splash ring have been removed, the dough hook may be removed by turning the hook clockwise while lifting.
The mixing bowl can be removed from the power unit by turning the bowl clockwise while lifting.
The contents may now be used as desired.
Care and Cleaning
of Stainless Steel Bowl
The stainless steel bowl and its components are dishwasher safe. It is recommended that the drive pin be removed from the bowl for cleaning, and that the pin, its gasket and the inner bearing surface, where the drive pin rides, be cleaned after every use. After cleaning, a little vegetable oil placed on the drive pin gasket will help to lubricate the surface.
The power unit of the kitchen machine should be cleaned using a clean, damp cloth only. Never use coarse or caustic cleaning products to clean this appliance. Never immerse the power unit in water.
23