Merco Savory RT-2VSE, RT-2VSHO service manual Conveyor Chain

Page 4

L – CONVEYOR CHAIN

Figure 8

1.With outer case removed, loosen motor mounting bracket retaining bolts on underside of unit and slide motor to the left.

2.Loosen rear shaft adjusting bracket nuts and bearing retaining bracket nuts on both sides of unit.

3.Slide rear conveyor shaft forward to loosen the tension.

4.Separate the chain at any link and slide out from front of unit.

5.Before installing new chain, check for proper orientation (see Figure 8) and correct number of links.

6.Starting at front of unit, slide chain under front shaft and push towards rear of unit. Bring chain up and over rear shaft assembly and pull towards front. Connect links. CAUTION: MAKE SURE CHAIN IS NOT INSTALLED AT AN ANGLE.

7.Push back on rear shaft assembly until excess slack is removed from chain. Holding tension, tighten both the rear shaft adjusting brackets and bearing retaining brackets on both sides of unit.

8.Check for proper tension. There should be approximately ￿” to ¾” space between the conveyor chain and the ledge on the inside of the unit cavity.

9.Slide motor to the right to tighten drive chain tension. There should be approximately ¼” play in the drive chain.

10.Tighten motor mounting bracket retaining bolts on underside of unit.

Spacer Nuts

Rear Shaft

Assembly

Spacer Nuts

 

 

Bearing

Wire Belt

 

 

Retainer

 

 

 

Tension Adjusting

Bracket

Front Shaft

 

 

 

 

 

 

 

Assembly

 

 

 

 

 

 

 

 

 

 

Bearing

 

 

 

 

 

 

 

 

Bearing

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Retainer

 

 

Front Spacer

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

RT-2VSE/VSHO Service Manual

Image 4
Contents RT-2VSE & RT-2VSHO Toaster Parts Replacement Gear Motor Drive ChainDrive Motor Sprocket Rear Conveyor Shaft SprocketConveyor Chain Front & Rear Shaft Bearings Problem Possible Causes Suggested Remedies Problem Possible Causes Suggested Remedies RT-2VSE Schematic RT-2VSHO Schematic This page intentionally left blank Parts List Letter DescriptionExploded View

RT-2VSHO, RT-2VSE specifications

The Merco Savory RT-2VSHO and RT-2VSE are state-of-the-art heated holding cabinets designed to elevate foodservice operations. These advanced equipment solutions are tailored to meet the demands of high-volume kitchens, ensuring that food is held at optimal temperatures while preserving quality and taste.

One of the main features of the RT-2VSHO and RT-2VSE is their exceptional temperature control. Equipped with precise digital thermostats, these cabinets allow operators to set and maintain specific temperature ranges, ensuring that food stays safe for consumption. The intuitive digital display provides real-time feedback on internal conditions, enabling users to monitor temperatures at a glance.

The design of the Merco Savory cabinets is user-focused. The RT-2VSHO model, featuring glass doors, allows for visibility of food items without opening the cabinet, reducing temperature fluctuations and energy consumption. On the other hand, the RT-2VSE model comes with solid doors, providing additional insulation and energy efficiency.

Both models boast robust construction and superior insulation. The stainless-steel exterior not only enhances durability but also simplifies cleaning and maintenance. With a fully insulated cavity, these cabinets minimize heat loss, contributing to energy savings and maintaining consistent temperatures.

Another notable characteristic is the cabinets' flexibility and capacity. With adjustable shelving, operators can customize the interior space to accommodate various food items, from trays of steaming dishes to pre-packaged meals. The RT-2VSHO and RT-2VSE provide ample storage, making them ideal for busy kitchens, catering operations, or buffets.

The technology integrated into these holding cabinets includes advanced heating elements that evenly distribute heat throughout the interior, ensuring that all food items are held at safe and desirable temperatures. Moreover, both models are designed with easy-to-use controls, making them accessible for staff at all skill levels.

For operational efficiency, the Merco Savory RT-2VSHO and RT-2VSE models are also equipped with features such as lightweight, heavy-duty casters for mobility, allowing kitchen staff to reposition them as needed.

In summary, the Merco Savory RT-2VSHO and RT-2VSE holding cabinets are exemplary solutions for any professional kitchen looking to maintain food quality while ensuring safety standards. With their advanced temperature control, robust construction, and user-friendly features, these cabinets stand out as essential tools for culinary success.