LOCATION
.
1.Place the toaster on a flat surface and in such a way that the unit's vents are not blocked. Air must circulate under and through the vents provided on the base, right side
2.Locate the unit near a wall receptacle of the proper configuration. DO NOT USE AN EXTENSION CORD. Plug the power supply cord into an outlet (receptacle) of the voltage specified on the unit's
rating plate. Outlets must be properly grounded.
Motor Switch
Pilot Light
Temperature
Control
Main Switch
Motor Switch
Pilot Light
Temperature
Control
Main Switch
M-83 & M-91 OPERATING INSTRUCTIONS
A.PREPARATION
1.
2.Use of Oil: Any
B.CONTROL PANEL
The face of the panel has two (2) Iighted rocker switches and a temperature control:
1.Main S witch - main power On/off.
2.Motor Switch - On/off switch turns both butter roller and conveyor on and off.
3.Temperature Control - Controls the temperature of the grill. The pilot light will stay on until the grill temperature has been attained and will then turn off. Allow .the pilot light to cycle twice so the unit is at stabilized temperature for toasting buns.
NOTE: During slow periods to conserve energy and prolong motor life, you may turn temperature control down to 150°F (66°C) and turn off motor switch.
4.Pilot Light - Glows when grill is on.
6