TABLE OF CONTENTS
GENERAL INFORMATION AND TROUBLESHOOTING | 2 |
M SERIES - DIAGONAL CONTACT CONVEYOR TOASTERS | |
Electrical Specifications | 3 |
Installation | 3 |
Location | 6 |
Operating Instructions | 6 |
Field Adjustments & Cleaning | 7 |
Troubleshooting Guide | 9 |
AT SERIES - HORIZONTAL RADIANT CONVEYOR TOASTERS | |
Electrical Specifications | 10 |
Installation | 11 |
Convertible Instructions | 12 |
Operating Instructions | 13 |
Electrical Specifications | 14 |
Installation | 14 |
Operating Instructions | 15 |
WARRANTY IN FORMATION | 19 |
|
|
WARNING: In Europe, appliance must be connected by an earthing cable to all other units | ! |
! in the complete installation and thence to an independent earth connection in compliance | |
with EN |
|
|
|
WARNING: An earthing cable must connect the appliance to all other units in the complete | ! |
! installation and from there to an independent earth connection. |
GENERAL INFORMATION
General Installation:
1.Always clean equipment thoroughly before first use. (See general cleaning instructions).
2.Check rating label for your model designation & electrical rating.
3.Locate equipment on level counter and plug into a grounded outlet so that the plug is accessible. (See individual description for electrical loads).
4.On units bearing the CE marking, the appliance must be connected by an earthing cable to all other units in the complete installation and then to an independent earth connection.
GENERAL TROUBLESHOOTING
Always ask & check:
1.Is the unit plugged in?
2.Check circuit breaker.
3.Is power switch on and pilot light glowing?
4.Check rating label. Are you operating unit on proper voltage?
5.If the supply cord is damaged it should be replaced by an identical supply cord.
If the above checks out and you still have problems, call an APW Wyott authorized service agency.
2