Surface Cooking

Surface Controls

CAUTION

•If flame should go out during a cooking operation, turn the burner off. If a strong gas odor is detected, open a window and wait five minutes before relighting the burner.

•Be sure all surface controls are set in the OFF position prior to supplying gas to the cooktop.

•Expect some parts of the cooktop, especially around the burners, to become warm or hot during cooking.

Surface Control Knobs

Use to turn on the surface burners. An infinite choice of heat settings is avail- able from LOW to HIGH. At the HIGH setting a detent or notch may be felt.

Pilotless Ignition

Pilotless ignition eliminates the need for a constant standing pilot light. Each surface burner has a spark ignitor. Use care when cleaning around the surface burner.

If the surface burner does not light, check if ignitor is broken, soiled or wet.

Suggested Cooking

Guidelines

The size and type of cookware, type and amount of food and BTU of the burner will determine where to set the knob for cooking operations. Use the graphics printed around the knobs as a guide. The following descriptions will aid in choosing the setting that will give optimum results:

Hold or Warm: Food maintains a temperature above

140° F without continuing to cook. Food is heated on a higher flame size until it reaches this temperature and then the flame size is reduced. Never use a hold or warm setting to reheat cold food. Be sure knob is adjusted to produce a stable flame. (Use the LOW setting or the simmer burner to keep food warm.)

Simmer: Food forms bubbles that barely break the surface. Foods are between 185° F and 200° F. A simmer setting can also be used to steam or poach foods or continue cooking covered foods. (Adjust the knob between HIGH and LOW to obtain the desired simmer action.)

Slow Boil: Food forms bubbles at a moderate pace. A slow boil setting can also be used for most frying and for maintaining the cooking of large amounts of liquids. (Adjust the knob between HIGH and LOW to obtain the desired boil action.)

Boil: Liquid forms bubbles at a rapid pace. A fast boil setting can be used to bring liquid to a boil, brown meat, stir fry, saute, and heat oil for frying before turning to a lower setting. The HIGH setting is always used to bring liquids to a boil. Once the liquid boils, always reduce the flame size to the lowest setting that will maintain the boil action. (Turn the knob to HIGH then adjust the flame size to fit the size of the pan.)

Setting the controls

1.Place a pan on the burner grate. (To preserve the grate finish, do not operate the burners without a pan on the grate to absorb the heat from the burner flame.)

2.Push in knob and turn immediately counterclockwise to the LIGHT setting.

•A clicking (spark) sound will be heard and the burner will light. (All ignitors will spark when any surface burner knob is turned on. However, only the selected burner will light.)

3.Turn knob to desired setting. Visually check setting to ensure proper flame size.

4.Do not leave cooktop unattended.

Operating During a Power Failure

1.Hold a lighted match to the desired surface burner head.

2.Push in and turn the control knob slowly to the desired setting.

CAUTION

•When lighting the surface burners, be sure all of the controls are in the OFF position. Strike the match first and hold it in position before turning the knob.

•Do not leave the cooktop unattended when cooking during a power failure.

8111P536-60 specifications

The Maytag 8111P536-60 is a standout appliance designed for the modern kitchen, embodying both functionality and innovation. This high-efficiency model offers an array of features that enhance its usability and performance, making it a preferred choice for homeowners looking for reliability and convenience.

One of the main features of the Maytag 8111P536-60 is its powerful motor, which ensures optimal performance while using less energy. This energy-efficient design aligns with today's environmental standards, reducing the carbon footprint without compromising on power. With its high-efficiency rating, users can save money on energy bills while enjoying the benefits of a robust appliance.

The appliance includes a variety of wash cycles, allowing users to select the perfect setting for their specific needs. Whether it’s a quick wash for lightly soiled dishes or a deep clean for heavily soiled pots and pans, this model accommodates them all. The intuitive control panel simplifies the selection process, giving users quick access to their preferred settings.

Another significant characteristic of the Maytag 8111P536-60 is its durable construction. Built with high-quality materials, this model is designed to withstand the rigors of daily use. The stainless steel interior not only enhances its aesthetic appeal but also promotes better hygiene by resisting stains and odors.

The Maytag 8111P536-60 also features advanced noise reduction technology, ensuring a quieter operation. This is particularly beneficial for open-plan homes where kitchen noise can disrupt the ambiance of adjoining living spaces. It allows users to run their appliances at any time of the day without disturbing family or guests.

In addition, this model includes a delay start feature, providing flexibility for users to schedule wash cycles to fit their routines. The interior space is thoughtfully designed, with adjustable racks that can accommodate various dish sizes, from oversized pots to delicate glassware.

With a commitment to quality and performance, the Maytag 8111P536-60 emphasizes both efficiency and user-friendliness. It is a solid investment for anyone looking to enhance their kitchen with a reliable and feature-rich appliance, ensuring that everyday tasks are handled with ease and convenience. Whether for a family gathering or a simple dinner, this model rises to the occasion, making cooking and cleaning a more enjoyable experience.