Maytag 8101P668-60 Electrical Connections, SERVICE-PARTS Information, Serial Plate

Page 3

ELECTRICAL CONNECTIONS

This unit should be properly protected and wired according to local electrical code and National Electrical Code.

It is advisable that a competent electrician should accomplish the electrical wiring and hookup.

120/240 VAC or 120/208 VAC 60Hz. See serial plate located under the range top control panel on this unit for power requirements. The neutral of this unit is grounded to the frame through the solid grounding wire. (The ground and the white wires are twisted together at the termination of the conduit.) If used on new branch-circuit installations (1996 NEC), mobile homes, recreational vehicles, or in an area where local codes prohibit grounding through the neutral conductor, untwist or disconnect the ground wire and connect to ground in accordance to local code. Connect the white neutral to the service neutral. Connect all wires to the branch circuit with approved connectors. Use copper or aluminum wire. If aluminum wire is used, use connectors recognized for joining aluminum to copper.

The chart to the right recommends the minimum circuit protection and wire size if the appliance is the only unit on the circuit.

HOW TO REMOVE RANGE FOR SERVICING

Follow these procedures to remove appliance for servicing:

1.Slide range forward to disengage range from the anti-tip bracket.

2.Disconnect electrical supply to appliance, if equipped.

3.Reverse procedure to reinstall.

4.To prevent range from accidentally tipping, range must be secured to the floor by sliding rear leveling leg into the anti-tip bracket.

Serial Plate

 

 

RECOMMENDED MINIMUM

 

K.W. RATING

CIRCUIT PROTECTION

WIRE SIZE

ON SERIAL PLATE

 

IN AMPERS

(AWG)

0 - 4.8

 

20

12

4.9

- 6.9

 

30

10

7.0

- 9.9

 

40

8

10.0

- 11.9

 

50

8

Plaque signalétique

60

6

12.0

- 14.9

 

W A R N I N G

DISCONNECT ELECTRICAL SUPPLY BEFORE SERVICING THE APPLIANCE.

SERVICE-PARTS INFORMATION

When your range requires service or replacement parts, contact your dealer or authorized service agency. Please give the complete model and serial number of the range which is located on front frame behind storage drawer.

Your range may not be equipped with some of the features referred to in this manual.

Image 3
Contents Maytag Corporation Electric Drop-In RangeConnecting the Range Follow ALL Installation InstructionsMobile Homes Disconnect Electrical Supply Before Servicing the Appliance SERVICE-PARTS InformationElectrical Connections Serial PlateToutes LES Cuisinières Peuvent SE Renverser ET Blesser Suivez Toutes LES Instructions D’INSTALLATIONRaccordement À LA Cuisinière Maisons MobilesRaccordement Électrique Renseignements SUR LES Services ET LES PiècesPlaque signalétique Suivez toutes les instructions dinstallationConexión DE LA Estufa Casas RodantesSiga Todas LAS Instrucciones DE Instalación Corriente Protección Mínima Tamaño Conexiones EléctricasInformación Sobre LOS Repuestos Placa de serie1830 Clearance DimensionsDégagements Dimensiones DE LOS Espacios DE Despeje1cm Dimensions/Dimensions/DimensionesOFF Wire Connection./Raccordement à 3 fils./Conexión trifilar OFF

8101P668-60 specifications

The Maytag 8101P668-60 is a robust appliance that caters to the needs of modern households, providing an impressive combination of reliability and efficiency. Designed with cutting-edge technologies, this model stands out for its performance and user-friendly features, making laundry tasks more manageable and effective.

One of the primary highlights of the Maytag 8101P668-60 is its powerful motor, engineered to deliver a dependable performance regardless of the load size. This motor ensures that users can wash everything from delicate fabrics to heavy-duty items without worrying about compromising the quality of the wash. Additionally, the high-efficiency design of this model contributes to reduced energy consumption, which is a significant benefit for environmentally conscious consumers.

The appliance features advanced wash cycles that cater to various fabric types and soil levels, allowing for customization of each laundry load. With options for quick wash, heavy-duty, and delicate cycles, users can select the ideal setting to suit their washing needs. The inclusion of a steam function further enhances cleaning, as it helps to lift tough stains and reduce wrinkles, making ironing easier.

Another noteworthy characteristic of the Maytag 8101P668-60 is its spacious drum capacity. The large capacity allows users to wash more laundry in a single cycle, saving time and energy. This feature is particularly advantageous for families or individuals with a significant amount of clothing and linens to clean.

Durability is another key selling point. The Maytag brand is synonymous with reliability, and the 8101P668-60 is no exception. Built with premium materials, this model is designed to withstand the rigors of frequent use. The stainless steel drum not only prevents chipping and peeling but also resists rust, ensuring that it remains in excellent condition over the long term.

The user interface is intuitive, featuring a straightforward control panel that offers clarity and ease of use. LED indicators provide real-time updates on the status of the wash cycle, enabling users to track progress easily.

In summary, the Maytag 8101P668-60 is a feature-rich washing machine that excels in performance, efficiency, and durability. Its advanced technologies, combined with user-friendly features and a robust design, make it an ideal choice for anyone looking for a reliable laundry appliance that meets their washing needs effectively.