Maytag 8101P668-60 Connecting the Range, Mobile Homes, Follow ALL Installation Instructions

Page 2

Electric Drop-In Range

I N S T A L L A T I O N I N S T R U C T I O N S

PLEASE KEEP THIS MANUAL FOR FUTURE REFERENCE

This manual is intended to assist in the initial installation and adjustments of the range.

• Only qualified personnel should install or service this range.

• Read “Safety Instructions” in Use & Care book before using range.

• Improper installation, adjustment, alteration, service, maintenance or use of range can result in serious injury or property damage.

• Installer, take care not to damage flooring.

• This installation requires 2 people.

C A U T I O N S

Do not lift or move range by grasping door handles or main top.

This range has been designed in accordance with the requirements of various safety agencies and complies with the maximum allowable wood cabinet temperatures of 194˚F. If this range is installed with cabinets that have a lower working temperature than 194˚F, discoloration, delamination or melting may occur.

Place range in a well lit area. Do not set range over holes in the floor or other locations where it may be subject to strong drafts. Any opening in the wall behind the range and in the floor under the range should be sealed. Make sure the flow of cooling/ventilation air is not obstructed below the range.

Note: A range should NOT be installed over kitchen carpeting.

MOBILE HOMES

W A R N I N G

All RANGES CAN TIP AND CAUSE INJURIES TO PERSONS.

INSTALL ANTI-TIP DEVICES PACKED WITH RANGE.

FOLLOW ALL INSTALLATION INSTRUCTIONS.

A risk of range tip-over exists if the appliance is not installed in accordance with the provided installation instructions. The proper use of the ANTI-TIP device minimizes the risk of TIP-OVER. In using this device the consumer must still observe the safety precautions as stated in the USE and CARE MANUAL and avoid using the oven doors as a step stool. Installation instructions are provided for wood and cement in either floor or wall. Any other type of construction may require special installation techniques as deemed necessary to provide adequate fastening of the ANTI- TIP bracket to the floor or wall. The bracket must be installed to engage the RIGHT rear leveling foot. Install the bracket as shown in step 1.

The installation of a range designed for mobile home installation must conform with the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24 HUD, Part 280) or, when such standard is not applicable, the Standard for Manufactured Home Installations ANSI A225.1/NFPA 501A, or with local codes. In Canada the range must be installed in accordance with the current CSA Standard C22.1 - Canadian Electrical Code Part 1 and Section Z240.4.1.

CONNECTING THE RANGE

The range must be installed in accordance with Local and National Electric Code (NEC) ANSI/NFPA No. 70-latest edition, or Canadian Electric Code CSA STD.C221 latest edition. See the serial plate for total connected KW rating.

Your local utility company will tell you whether the present electric service to your home is adequate. It may be necessary to increase the size of the wiring to the house and service switch to take care of the electrical load demanded by the range.

Most local Building Regulations and Codes require that all electrical wiring be done by licensed electricians. All wiring should conform to Local and National Electrical Codes. This range

W A R N I N G

IMPROPER INSTALLATION OF THE GROUNDING CIRCUIT CAN RESULT IN A RISK OF ELECTRIC SHOCK.

requires a single phase three wire 120/240 or a 120/208 volt, 60 Hz, AC circuit. Wiring codes require a separate circuit be run from the main entrance panel to the range and that it be equipped with separate disconnect switch and fuses, either in the main entrance panel or in a separate switch and fuse box.

Image 2
Contents Electric Drop-In Range Maytag CorporationMobile Homes Connecting the RangeFollow ALL Installation Instructions Serial Plate SERVICE-PARTS InformationElectrical Connections Disconnect Electrical Supply Before Servicing the ApplianceMaisons Mobiles Suivez Toutes LES Instructions D’INSTALLATIONRaccordement À LA Cuisinière Toutes LES Cuisinières Peuvent SE Renverser ET BlesserSuivez toutes les instructions dinstallation Renseignements SUR LES Services ET LES PiècesPlaque signalétique Raccordement ÉlectriqueSiga Todas LAS Instrucciones DE Instalación Conexión DE LA EstufaCasas Rodantes Placa de serie Conexiones EléctricasInformación Sobre LOS Repuestos Corriente Protección Mínima TamañoClearance Dimensions 1830Dimensiones DE LOS Espacios DE Despeje DégagementsDimensions/Dimensions/Dimensiones 1cmOFF Wire Connection./Raccordement à 3 fils./Conexión trifilar OFF

8101P668-60 specifications

The Maytag 8101P668-60 is a robust appliance that caters to the needs of modern households, providing an impressive combination of reliability and efficiency. Designed with cutting-edge technologies, this model stands out for its performance and user-friendly features, making laundry tasks more manageable and effective.

One of the primary highlights of the Maytag 8101P668-60 is its powerful motor, engineered to deliver a dependable performance regardless of the load size. This motor ensures that users can wash everything from delicate fabrics to heavy-duty items without worrying about compromising the quality of the wash. Additionally, the high-efficiency design of this model contributes to reduced energy consumption, which is a significant benefit for environmentally conscious consumers.

The appliance features advanced wash cycles that cater to various fabric types and soil levels, allowing for customization of each laundry load. With options for quick wash, heavy-duty, and delicate cycles, users can select the ideal setting to suit their washing needs. The inclusion of a steam function further enhances cleaning, as it helps to lift tough stains and reduce wrinkles, making ironing easier.

Another noteworthy characteristic of the Maytag 8101P668-60 is its spacious drum capacity. The large capacity allows users to wash more laundry in a single cycle, saving time and energy. This feature is particularly advantageous for families or individuals with a significant amount of clothing and linens to clean.

Durability is another key selling point. The Maytag brand is synonymous with reliability, and the 8101P668-60 is no exception. Built with premium materials, this model is designed to withstand the rigors of frequent use. The stainless steel drum not only prevents chipping and peeling but also resists rust, ensuring that it remains in excellent condition over the long term.

The user interface is intuitive, featuring a straightforward control panel that offers clarity and ease of use. LED indicators provide real-time updates on the status of the wash cycle, enabling users to track progress easily.

In summary, the Maytag 8101P668-60 is a feature-rich washing machine that excels in performance, efficiency, and durability. Its advanced technologies, combined with user-friendly features and a robust design, make it an ideal choice for anyone looking for a reliable laundry appliance that meets their washing needs effectively.