Chief Manufacturing LSMVPU, MSMVPU installation instructions Plumb Adjustment

Installation Instructions MSMVPU/LSMVPU

Plumb Adjustment

1.Using the provided 1/2" wrench (X), turn plumb adjustment bolt to the left to adjust screen away from the wall. (See Figure 13)

2.Using the provided 1/2" wrench (X), turn plumb adjustment bolt to the right to adjust screen toward the wall. (See Figure 13)

	1	2
1
2	plumb adjustment
	bolt

Figure 13

Adjusting Roll/Height of Wall Brackets

NOTE: The height adjust wall brackets allow adjustment of

+1/2".

1.Turn to right (tighten) to raise side of screen.(See Figure 14)

2.Turn to left (loosen) to lower side of the screen. (See Figure 14)

1	Raises screen
	2	Lowers screen
(W)
(Screen not shown for clarity)

Figure 14

Locking Mount (Optional)

1.Add security bracket (S) to the mount. (See Figure 15)

2.Add padlock (not included) through holes on small security

bracket (S) and mount. (See Figure 15)

3.Add hold-back bracket (T) to the mount to secure mount in recessed position. (See Figure 15)

4.Repeat Steps 1-3 for the other upright for additional security.

3 (T)

1 (S)

2

Figure 15

11