JBL SDP-5, Home Theater System, 201 manual IR Receiver, Volume Knob, Mode and Buttons

ZONE2 VOLUME -37dB

SDP-5

Basic Operation

3. IR Receiver

Receives infrared commands
from the SDP-5 remote
control (2-9). There are	Red LED	Amber LED
three LEDS located in this
	Blue LED
area as shown at the right.
An amber LED blinks when

a remote control command is received. A red LED lights when the A/D converters are overloading. And, a blue LED lights when the SDP-5 is powered on and activated – even if the FRONT PANEL DISPLAY menu STATUS parameter is set to ALWAYS OFF (3-52).

4. Volume Knob

Adjusts volume level in the Main Zone or Zone 2.

Note:

When SDP-5 output levels have been properly calibrated (3-39), the +0dB volume level setting corresponds to THX reference levels (75dB).

To use the volume knob to adjust Main Zone volume level:

Rotate the volume knob clockwise			VOLUME	-37dB
to	increase	or counterclockwise
to	decrease	volume level in 1dB

increments. The horizontal bar graph (2-10) shown at the right appears on the on-screen and front panel displays. This graph illustrates the position at which the current Main Zone volume level falls within the –80 to +12dB volume range.

To use the volume knob to adjust Zone 2 volume level:

1.Press and hold the front panel Zone 2 input selection button that corresponds with the current input source. For instance, if the current input source is using the DVD1 input, press and hold the Zone 2 DVD1 input selection button.

2. While holding the selected Zone 2 input selection button, rotate the volume knob clockwise to increase or counterclockwise to decrease volume level in 1dB increments. The horizontal bar graph (2-10) shown at the right appears on the on-screen and front panel displays. This graph illustrates the position at which the current Zone 2 volume level falls within the –80 to +12dB volume range.

3.Release the selected Zone 2 input selection button when Zone 2 volume level has been set.

Note:

Remote control input selection buttons cannot be used to select Zone 2 volume level adjustment, even if the Zone 2 command bank is activated.

5. Mode and Buttons

Scroll to the previous ( ) and the next ( ) available listening mode. Scrolling occurs in the order shown on the MODE ADJUST menu (5-2). Refer to the Listening Mode Activation section that begins on page 5-2 for more information.

. . . Front Panel Overview continues on page 2-4

2-3