JBL 201, SDP-5, Home Theater System manual ON-SCREEN Display Setup, Status

SETUP

JBL Synthesis

MAIN MENU

MODE ADJUST AUDIO CONTROLS SETUP

SETUP

INPUTS SPEAKERS

REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER

LOCK OPTIONS

DISPLAY SETUP

ON-SCREEN DISPLAY FRONT PANEL DISPLAY

A/V SYNC DELAY	OFF
CUSTOM NAME	OFF
EDIT CUSTOM NAME

ON-SCREEN DISPLAY

STATUS	2 SECONDS
POSITION		TOP
FORMAT		NTSC
BACKGROUND		ON
REMOTE STATE		ON

ALWAYS ON

2SECONDS ALWAYS OFF

ON-SCREEN DISPLAY SETUP

SETUP DISPLAYS ON-SCREEN DISPLAY

Selecting the DISPLAY SETUP menu ON-SCREEN DISPLAY option opens the ON-SCREEN DISPLAY menu shown above, which can be used to customize the on-screen display.

	Default	Possible
Parameter	Setting	Settings
STATUS	2 SECONDS	ALWAYS ON, 2 SECONDS,
		ALWAYS OFF
POSITION	TOP	TOP, CENTER, BOTTOM
FORMAT	NTSC	SECAM, PAL, NTSC
BACKGROUND	ON	ON, OFF
REMOTE STATE	ON	ON, OFF

STATUS			ALWAYS ON, 2 SECONDS, ALWAYS OFF
SETUP	DISPLAYS	ON-SCREEN DISPLAY	STATUS

Activates and deactivates the on-screen display sent to the Main Zone video output connector. When set to ALWAYS ON, the on-screen display remains on at all times. When set to 2 SECONDS, the on-screen display appears for 2 seconds whenever the input source changes or the SDP-5 receives a command. When set to ALWAYS OFF, the on-screen display remains off at all times. It will not reappear until the ON-SCREEN DISPLAY menu STATUS parameter is set to ALWAYS ON or 2 SECONDS.

Note:

When the ON-SCREEN DISPLAY menu STATUS parameter is set to ALWAYS OFF, the on-screen display immediately disappears. Press the remote control OSD button or use the front panel display as a guide to reset the parameter to ALWAYS ON or 2

SECONDS.

3-50