JBL SDP-5, Home Theater System, 201 manual Surround DLY

SDP-5

Appendix

SOUND STAGE

FRONT

NEUTRAL

REAR

SURROUND DLY

0 to 15ms

When the Shift command bank is active, pressing the remote control Stat button opens the STATUS menu for the current input source. This menu contains parameters that provide information about the current input source and listening mode. STATUS menus are available for 2-channel, Dolby Digital, dts(-ES), digital, and analog input sources. Refer to page 2-18 for more information.

STATUS menu parameters provide information about the current input source and listening mode. These parameters cannot be adjusted. Refer to the STATUS Menu Parameter Descriptions section that begins on page 2-23 for more information.

SPEECH DETECT

ON

OFF

SUB LEVEL

OFF, -30 to +12dB

SURR ROLLOFF

500Hz to 20.0kHz, OFF

SURROUND EX

AUTO

ON

OFF

SURROUND MIX

-5 to +5dB

VOCAL ENHANCE

+6.0dB

+3.0dB

+0.0dB

2CH STATUS

INPUT

MODE

INPUT TYPE

SAMPLE RATE

dB	L		C	R		SL	SR	SB	LFE
0
-6
-15		X	X		X	X	X	X	X
-30
-45

DTS -ES STATUS PG1

INPUT

MODE

CHANNELS

BIT RATE

ESI ENCODING

dB L C R SL SR SB LFE

0 -6

%!D STATUS PG1

INPUT

MODE

CHANNELS

BIT RATE

EX ENCODIN G

dB L C R SL SR SB LFE

0 -6

-15X X X X X X X -30

-45

DTS -ES STATUS PG2

WORD LENGTH

SAMPLE RATE

%!D STATUS PG2

SAMPLE RATE

2.0ENCODING DIALOG OFFSET MIX ROOM CENTER MIX LVL SURR MIX LVL

5.1a BYPASS STATUS

INPUT

MODE

INPUT TYPE

Activating the SDP-5 while pressing and holding the front panel or remote control Mute button opens the FACTORY SETTINGS menu shown below. Refer to page 6-4 for more information.

FACTORY SETTINGS	FACTORY SETTINGS
EXIT	HAVE BEEN RESTORED
RESTORE DEFAULTS	PRESS ANY KEY
	TO RESTART

-15X X X X X X X -30

-45

2CH BYPASS STATUS	DIGITAL STATUS
INPUT	INPUT
MODE	MODE
INPUT TYPE	INPUT TYPE
	SAMPLE RATE

A-13