JBL SDP-5, 201 manual Assigning Audio & Video Input Connectors, Parameter Possible Settings

SETUP

JBL Synthesis

ASSIGNING AUDIO & VIDEO INPUT CONNECTORS

MAIN MENU

MODE ADJUST AUDIO CONTROLS SETUP

SETUP

INPUTS SPEAKERS

REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER

LOCK OPTIONS

INPUT SETUP

DVD1

DVD2

SAT

VCR

TV

CD

TUNER

AUX

DVD1 INPUT SETUP

NAME							DVD1
DIGITAL IN						COAX-1
ANALOG IN							NONE
ANLG IN LVL							+0dB
VIDEO IN					S-VIDEO-1
COMPONENT IN							1
2-CH							FILM
						L7
%!D			5.1				FILM
						L7
							FILM
						L7
DTS		DTS		-ES
	-ES
MAIN ADVANCED
ZONE2 IN						DIGITAL

The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu may be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input may be substituted.

The SDP-5 has eight configurable inputs, each of which can be assigned to its eight digital audio, eight analog audio, five composite video, five S-video, or three component video input connectors. The table below lists the INPUT SETUP menu parameters that can be used to assign audio and video input connectors. The ANLG IN LVL parameter can be used to adjust analog audio input levels for the selected input. These parameters are highlighted on the INPUT SETUP menu shown above.

Parameter	Possible Settings
DIGITAL IN	COAX-1 to 4, OPTICAL-1 to 4, NONE
ANALOG IN	ANALOG-1 to 8, 5.1 ANLG (3-5) or (6-8),
	NONE
ANLG IN LVL	AUTO, -18 to +12dB
VIDEO IN	COMPOSITE-1 to 5, S-VIDEO-1 to 5, NONE
COMPONENT IN	COMPONENT 1 to 3, NONE

3-6