JBL 201, SDP-5 manual Power Switch, AC Input Connector, Digital Audio Input Connectors S/PDIF

SDP-5

Basic Operation

REAR PANEL OVERVIEW

Note:

The numbered items that begin below correspond to the rear panel illustration on the next page.

1. Power Switch

Connects power to the AC input connector and disconnects power from the AC input connector. The c represents the "off" position and therepresents the "on" position. When the SDP-5 is powered on, the front panel standby button or remote control On button can be used to activate and deacti- vate standby mode. When the SDP-5 is powered off, standby mode is not available.

2. AC Input Connector

Provides power to the SDP-5 through the supplied power cord (3 wire, 10 amp, IEC 320).

3. Digital Audio Input Connectors (S/PDIF)

Provide digital audio input in the Main Zone. Four S/PDIF coaxial and four S/PDIF optical (Toslink) input connectors are available. These connectors are compatible with PCM (44.1, 48, 88.2, and 96kHz), Dolby Digital, and dts(-ES) sources. These connectors are not compatible with MPEG (MP3) sources.

4. Digital Audio Output Connector (S/PDIF)

Provides digital audio output in Zone 2. One S/PDIF coaxial connector is available.

5. Analog Audio Input Connectors

Provide analog audio input in the Main Zone and Zone 2. Eight stereo analog audio input connectors labeled 1 to 8 are available. The connectors labeled 3, 4, and 5 and 6, 7, and 8 can be configured as 5.1-channel connectors. When a 5.1- channel analog audio source is present in the Main Zone, input signals are sent to the Main Zone audio output connectors as indicated below. When a 5.1-channel analog source is present in the Main Zone and the INPUT SETUP menu ZONE2 IN parameter is set to DMIX, only the (L) and (R) input signals are sent to the Zone 2 audio output connectors. Refer to page 3-45 for more information.

Input Connector	Output Connector
(L)	Front L
(R)	Front R
(C)	Center
(SUB)	Subwoofer
(LS)	Side L and Rear L
(RS)	Side R and Rear R

6. Main Zone Audio Output Connectors

Provide analog audio output in the Main Zone. Eight connectors labeled Front L/R, Center, Subwoofer, Side L/R, and Rear L/R are available.

. . . Rear Panel Overview continues on page 2-6

2-5