JBL Home Theater System, SDP-5, 201 manual Video Input Connectors, Main Zone Video Output Connectors

SDP-5

Basic Operation

9. Video Input Connectors

Provide video input in the Main Zone and Zone 2. Five composite video connectors labeled Video 1 to 5, five S-video connectors labeled S-Video 1 to 5, and three component video connectors labeled 1 to 3 are available. The component video connectors are not available for Zone 2.

10. Main Zone Video Output Connectors

Provide video output in the Main Zone. One composite video connector, one S-video connector, and one component video connector are available.

11. Zone 2 Video Output Connectors

Provide video output in Zone 2. One composite video connector and one S-video connector are available. Alternatively, these connectors can be used to connect a video recording device.

Note:

•Composite video output connectors are available when a composite or S-video source is present.

•S-video output connectors are available when an S-video source is present.

•Component video output connectors are available when a component video source is present.

13. RS-232 Connectors

The RS-232 connector labeled 1 provides serial control. It is capable of performing configuration downloads and flash memory software upgrades. The RS-232 connector labeled 2 is capable of supporting future developments.

14. Trigger Output Connectors

Provide 12V DC output to control connected components. Two trigger output connectors are available on a 5-pin DIN connector. The connector labeled PWR – the power trigger output connector – is not configurable. It is activated when the SDP-5 is activated, and deactivated when the SDP-5 is deactivated. The trigger output connector labeled 1 can be configured for remote or program operation. Refer to page 3-54 for more information.

GROUND

TRIGGER 2 TRIGGER 1

GROUND POWER TRIGGER

Note:

The default trigger configuration shown on page 3-55 includes settings designed for use in JBL Synthesis systems with switching transducers for listening modes.

12. IR IN Connector

Accepts input of IR signals from infrared distribution equipment. One 3.5mm jack that accepts a stereo plug (Tip/ Ring connection) or mono plug (Tip/Sleeve connection) is available.

15. Removable Access Panels

Accommodate connectors for emerging technologies.

2-7