JBL 201, SDP-5, Home Theater System manual Dts THX Music, +0.0dB 10.0 to +0.0dB

SDP-5

MODE ADJUST

The table at the bottom of the previous page indicates the conditions in which THX Ultra2 and dts-ES decoding are engaged.

•THX Ultra2 decoding is engaged when the ES DECODING parameter is set to OFF, or the ES DECODING parameter is set to AUTO and a 5.1-channel dts source is detected.

•dts-ES decoding is engaged when the ES DECODING parameter is set to ON, or the ES DECODING parameter is set to AUTO and a 5.1-channel matrix-encoded or 6.1-channel discrete-encoded dts-ES source is detected.

•Listening mode name differs depending on the encoding present in the input source, the ES DECODING parameter setting, and the speaker setup.

–The dts THX ULTRA2 listening mode is available when THX Ultra2 decoding is engaged.

–The dts-ES THX listening mode is available when dts-ES decoding is engaged.

–The dts THX ULTRA2 and dts(-ES) THX listening modes cannot be activated unless side and rear speakers are present.

dts THX MUSIC

MODE ADJUST DTS THX MUSIC

•Designed for playback of 5.1-channel dts music sources.

•The dts THX MUSIC listening mode cannot be activated unless side and rear speakers are present.

•ASA processing is applied to signals sent to the rear speakers. Refer to the ASA parameter description on page 3-34 for more information.

•Recommended for home theaters with THX-certified loudspeakers.

Option/	Default	Possible
Parameter	Setting	Settings
LFE MIX	+0.0dB	-10.0 to +0.0dB
OUTPUT LEVELS
CUSTOM

Listening mode menu option and parameter descriptions begin on page 5-28.

Note:

The dts THX MUSIC listening mode can only be activated with the front panel or remote control Mode and buttons.

5-25