JBL SDP-5, 201 Audio Controls, Bass, Treble, Default Possible Parameter Value Settings, To +6.0dB

AUDIO CONTROLS

JBL Synthesis

AUDIO CONTROLS

Selecting the MAIN MENU AUDIO CONTROLS option opens the AUDIO CONTROLS menu shown below, which can be used to customize the Main Zone audio output connectors and control the balance of the Zone 2 audio output connectors. The BASS, TREBLE, TILT EQ, LOUDNESS, BALANCE, and FADER parameters affect the Main Zone audio output connectors. These parameter settings affect all inputs and listening modes selected in the Main Zone, except the 5.1a BYPASS and 2CH BYPASS listening modes. The ZONE2 BALANCE parameter controls the balance of the Zone 2 audio output connectors. This parameter setting affects all inputs selected in Zone 2.

MAIN MENU

MODE ADJUST AUDIO CONTROLS SETUP

AUDIO CONTROLS

BASS	+0.0dB
TREBLE	+0.0dB
TILT EQ	+0.0dB
LOUDNESS	ON
BALANCE	<>
FADER	<>
ZONE2 BALANCE	<>

-6.0 to +6.0dB

	Default	Possible
Parameter	Value	Settings
BASS	+0.0dB	-6.0 to +6.0dB
TREBLE	+0.0dB	-6.0 to +6.0dB
TILT EQ	+0.0dB	-3.0 to +3.0dB
LOUDNESS	ON	ON, OFF
BALANCE	<>	L< to <> to >R
FADER	<>	B< to <> to >F
ZONE2 BALANCE	<>	L< to <> to >R

AUDIO CONTROLS menu parameter descriptions begin in the next column.

Note:

When the Zone 2 command bank is activated, pressing the remote control Blue button sets the BASS, TREBLE, and TILT EQ parameters to +0.0dB.

BASS			-6.0 to +6.0dB
AUDIO CONTROLS	BASS

Controls the amount of low-frequency boost or cut applied to the Main Zone audio output connectors labeled Front L/R, Center, and Subwoofer. The graph shown on the left of the next page illustrates the frequency response of BASS parameter settings.

TREBLE			-6.0 to +6.0dB
AUDIO CONTROLS	TREBLE

Controls the amount of boost or cut applied to the Main Zone audio output connectors labeled Front L/R and Center. The graph shown on the right of the next page illustrates the frequency response of TREBLE parameter settings.

4-2