JBL Home Theater System, SDP-5, 201 manual 1a Bypass, 2CH Bypass

SDP-5

MODE ADJUST

5.1a BYPASS

MODE ADJUST 5.1a BYPASS

•Designed for playback of 5.1-channel analog sources, such as DVD-A or SACD players.

•The 5.1-channel analog input connectors are sent directly to the Main Zone volume control and audio output connectors as shown on page 3-46. These signals receive no internal processing.

•When both side and rear speakers are present, surround channel signals are sent in parallel to the side and rear speakers. To configure a 5-channel speaker setup, set the OUTPUT LEVELS menu SIDE L/R or REAR L/R parameter to OFF to deactivate the associated surround speakers.

•The 5.1a BYPASS listening mode is automatically activated whenever one of the 5.1-channel analog audio input connectors is assigned to the selected input.

•The 5.1a BYPASS listening mode is the only listening mode available for 5.1-channel analog sources.

Option/

Parameter

OUTPUT LEVELS

CUSTOM

Listening mode menu option and parameter descriptions begin on page 5-28.

Note:

Speaker crossover settings, speaker distances, and audio (tone) controls are not available when the 5.1a BYPASS listening mode is activated.

2CH BYPASS

MODE ADJUST 2CH BYPASS

•Designed for playback of 2-channel analog sources.

•Analog audio input signals are sent to the Main Zone audio output connectors labeled Front L/R. These input signals receive no internal processing.

•The 2CH BYPASS listening mode is automatically activated when a 2-channel analog audio source is present and the MAIN ADV menu 2-CH ANLG BYP parameter is set to ON.

•The 2CH BYPASS listening mode is not available when the MAIN ADV menu INPUT SELECT parameter is set to AUTO and a digital audio source is present.

•No parameters are available for the 2CH BYPASS listening mode.

Note:

Speaker crossover settings, speaker distances, and audio (tone) controls are not available when the 2CH BYPASS listening mode is activated.

5-27