JBL Home Theater System Specifications, Audio Input & Output Connectors, Zone 2 Audio Performance

Appendix

JBL Synthesis

SPECIFICATIONS

Audio Input & Output Connectors

Analog Audio Inputs	•	8 stereo (RCA) or 5 stereo and one 5.1-channel or 2
		stereo and two 5.1-channel connectors
Digital Audio Inputs	•	4 S/PDIF coaxial (RCA) and 4 S/PDIF optical (TosLink)
		connectors
	•	Coaxial and optical input connectors conform to IEC-
		958, S/PDIF standards
	•	Accepts 44.1, 48, 88.2, and 96kHz sample rates
	• Accepts 16-24 bits PCM audio, Dolby Digital, dts, and
		dts-ES discrete data formats
Main Zone Audio	•	8 unbalanced (RCA) connectors for Front L/R, Center,
Outputs		Subwoofer, Side L/R, and Rear L/R
Zone 2 Audio Outputs	•	1 unbalanced (RCA, variable output level) stereo
		connector
	•	1 S/PDIF coaxial (RCA) connector

Main Zone Audio Performance

A/D Conversion	•	24-bit, 96kHz, dual-bit ∆∑ architecture
D/A Conversion	•	24-bit, 44.1 to 192kHz, multi-bit ∆∑ architecture
Frequency Response	• 10Hz to 20kHz, +0.05dB/-0.1dB, -0.5dB at 40kHz,
		reference 1kHz
THD + Noise	•	Below 0.008% at 1kHz, maximum output level
Dynamic Range	•	108dB minimum, 22kHz bandwidth
Signal-to-Noise Ratio	•	108dB minimum, 22kHz bandwidth
Input Sensitivity	•	200mVrms (2Vrms for maximum output level) at 0dB
		input gain

Main Zone Audio Performance (continued)

Input Impedance	•	100kΩ in parallel with 150pF
Output Level	•	150mVrms typical, 6Vrms maximum (RCA connectors)
	• Maximum value with full-scale input signal and volume
		at +6dB
Output Impedance	•	100Ω in parallel with 150pF (RCA connectors)
	•	50Ω in parallel with 150pF (XLR connectors)

Zone 2 Audio Performance

D/A Conversion	•	24-bit, 44.1 to 192kHz, multi-bit ∆∑ architecture
Frequency Response	•	10Hz to 20kHz, +0.1dB/-0.25dB, -0.75dB at 40kHz,
		reference 1kHz
THD + Noise	•	Below 0.005% at 1kHz, maximum output level
Dynamic Range	•	103dB minimum, 22kHz bandwidth
Signal-to-Noise Ratio	•	103dB minimum, 22kHz bandwidth
Input Sensitivity	•	200mVrms (4Vrms for maximum output level)
Input Impedance	•	100kΩ in parallel with 150pF
Output Level	•	200mVrms typical, 4Vrms maximum (RCA connectors)
	•	Maximum value with full-scale input signal and volume
		at 0dB
Output Impedance	•	100Ω in parallel with 150pF (RCA connectors)

A-2