Manuals / Omega / Lawn and Garden / Metal Detector

Omega 8000 Unit Specifications, Treasure Hunter’S Code Of Ethics, Lag coefficient 92 milliseconds

Models: 8000

1 24

Download 24 pages 1.01 Kb

Page 23

UNIT SPECIFICATIONS:

NOTES

UNIT SPECIFICATIONS:

Mechanical: S-rod with electronics housing on rod, 3-piece breakdown construction, nonmetallic telescoping lower rod, adjustable position arm rest

Weight: 2 lbs 14 oz with battery installed

Standard search coil: 10 inch (25 cm) open-frame elliptical concentric, waterproof

Batteries: single 9 volt rectangular alkaline

Operating principle: VLF induction balance

Operating frequency: nominal 7.8 kHz, microprocessor controlled

Basic sensitivity: 2.5 x 109 root Hertz (detectivity)

Lag coefficient: 92 milliseconds

Reactive overload: 5,000 micro-cgs (with standard search coil)

Resistive overload: 600 micro-cgs (with standard search coil)

Ground balance range: from ferrite to salt water inclusive

Discrimination ground suppression: combination of 2nd and 3rd order methods

Target ID ground suppression: 3rd order

Battery life: 20+ hours on good quality alkaline

Operating temp range: 14 to 122 degrees F (-10 to +50 C)

Operating humidity range: 0 - 90% noncondensing

TREASURE HUNTER’S CODE OF ETHICS:

1. Respect the rights and property of others.

2. Observe all laws, whether national, state or local.

3. Never destroy historical or archaeological treasures.

4. Leave the land and vegetation as it was. Fill in the holes.

5. All treasure hunters may be judged by the example you set. Always obtain permission before searching any site. Be extremely careful while probing, picking up, or discarding trash items. And ALWAYS COVER YOUR HOLES!

23

Image 23

Omega 8000 owner manual Unit Specifications, Treasure Hunter’S Code Of Ethics, Operating principle VLF induction balance

Contents

METAL DETECTOR 8 0MENU Selections TABLE OF CONTENTSRELIC TERMINOLOGYELIMINATION DISCRIMINATIONAssembly is easy and requires no tools ASSEMBLYThe detector can also be used without the strap, with no Adjusting the Arm RestArm Rest Strap ASSEMBLYBattery Voltage BATTERY LIFESPEAKER VOLUME AND BATTERY CHARGE BATTERY INDICATORV. Wave each object over the searchcoil QUICK-START DEMONSTRATIONI. Supplies Needed II. Position the DetectorXI. Wave the Nickel QUICK-START continuedIX. Wave the nickel X. Press the NOTCH touchpad on the front panel three times3. Identifying Buried Objects THE BASICS OF METAL DETECTING1. Ground Minerals 2. Trash5. Electromagnetic Interference EMI Use with headphones not includedTHE BASICS continued 4. Size and Depth of Buried ObjectsOPERATION and CONTROLS HOW TO WORK THE CONTROLSPOWERING UP 2. DISC / AT AUTOTUNE CONTROL PANELCONTROL KNOBS ARE AS FOLLOWS 1. SENSITIVITYTOUCHPAD CONTROLS ARE AS FOLLOWS CONTROL PANEL contGND GRAB Ground Grab FREQ Frequency SelectionNOTCH Selective Target Inclusion or Exclusion CONTROL SETTING DISPLAYTOUCHPAD CONTROLS continued TONES Number of Tones SelectionGROUND BALANCING WHAT IS GROUND BALANCING? Why do I need to Ground Balance?How to Ground Balance your detector INDICATION Ground ErrorGROUND BALANCING -Technical Info Fe3O4 BARGRAPHGROUND ERROR cont GROUND ERROR cont GROUND ADJUSTMENT CHARTAUDIO TARGET IDENTIFICATION SYSTEM READING THE DISPLAY DEPTH AND TARGET DISPLAYTYPICAL VALUE Pinpointing process in motion modes SEARCH TECHNIQUES in DISC modeCOIL DRIFT TARGET PINPOINTING in PINPOINT modePinpoint as follows Narrow It DownLag coefficient 92 milliseconds UNIT SPECIFICATIONSTREASURE HUNTER’S CODE OF ETHICS Operating principle VLF induction balanceFirst Texas Products L.L.C 5-YEAR LIMITED WARRANTYTREASURE HUNTER’S CODE OF ETHICS Proof of Purchase is required to make a claim under this warranty