Omega 8000 Audio Target Identification System, Ground Adjustment Chart, GROUND ERROR cont

GROUND ERROR cont.

GROUND ADJUSTMENT CHART

If	or in autotune
bars	pumping coil		then
appear	sounds like
AT TOP
	PUSHING SOUND
	OUT OF	PRESS		TO ADJUST
	GROUND
AT BOTTOM
	PULLING SOUND
	INTO	PRESS		TO ADJUST
	GROUND
	SAME SOUND			NO
NO BARS	WHEN RAISING	ADJUSTMENT
	AND LOWERING	NECESSARY

AUDIO TARGET IDENTIFICATION SYSTEM

Different types of metals will induce different types of sounds, depending on your TONES setting.

There are 4 choices in DISCRIMINATION MODE:

d1. Medium-to-high		pitch	tone,
varying in proportion to target
signal	strength. Large shallow
objects will produce a squeal. The
variable audio pitch provides you
more	information	about	the

detected object. Volume and Pitch increase with increase in signal strength.

d3. Three different audio tones. Bass Tone: Iron

Low Tone: Foil, 5¢, Tab and Zinc

High Tone: Dime, Qtr

d2. Iron produces a bass tone regardless signal strength. Volume varies in proportion to signal strength. Non-ferrous targets respond as in d1.

d4. Four Different audio tones Bass Tone: Iron

Low Tone: Foil, Tab, and Zinc

Medium Tone: 5¢

High Tone: Dime, Qtr

The default setting is d3.

To choose from the above selections, press the TONES touch pad. Each press of the TONES touch pad cycles to the next selection.

There are 4 choices in ALL-METALS MODE

A1, A2, A3, A4 - pitch varies with each setting.

18