CONTROL PANEL cont.
TOUCHPAD CONTROLS continued
TONES: Number of Tones Selection
In Discrimination mode, the OMEGA indicates target type by audio tone.
The TONES button allows the user to select one of four different ways to group target types by tone.
Your selection depends on personal preference and search objectives. For example, coin shooters usually select d3 or d4. Relic hunters might select d1 or d2, depending on search area conditions.
In
See page 18 for a detailed description of the tones provided for each selection.
NOTCH: Selective Target Inclusion or Exclusion
The purpose of the NOTCH function is to change the detection status of a target category.
•If a category was not eliminated from detection before being “notched,” then notching the category will eliminate it from detection.
•If a category was eliminated from detection before being “notched,” (i.e. the category’s icon was not illuminated), then notching the category will return
the category to detection.
Upon each press of NOTCH, a target icon will flash.
Each subsequent press will move the flashing icon to the right. The following target categories can be notched in or out:
Iron, Foil, Nickel, Tab,
After the Zinc category, pressing NOTCH will exit the NOTCH function.
To select a category for notching, press NOTCH until the desired icon flashes. After a few seconds, the flashing will time out and the current target category will be notched.
Practice pressing NOTCH a few times and its function will become obvious. The NOTCH feature is not available in Auto Tune Mode.
CONTROL SETTING DISPLAY
The setting for each control is displayed as a
This
When the SETTING value represents the Ground Balance setting, “GROUND” will be displayed under the number.
14
