Omega 8000 QUICK-START continued, IX. Wave the nickel, XI. Wave the Nickel, XIII. Press-and-hold

QUICK-START continued

VIII. Rotate the DISC knob until the words IRON, FOIL, NICKEL, P-TAB, S-CAP and ZINC all disappear.

IX. Wave the nickel

a. The nickel will not be detected.

X.Press the NOTCH touchpad on the front panel three times.

The word “NICKEL” will start flashing. Wait until the flashing stops. “NICKEL” will be illuminated.

XI. Wave the Nickel.

a. The nickel is now again detected. b. The nickel has been “notched in.”

XII. Rotate the right knob 100% counterclockwise and click on into AT mode Pass the quarter over the searchcoil. Vary the distance from the searchcoil on each pass. Notice the changing pitch and volume.

XIII. Press-and-hold

a. Notice that motion is not required.

A motionless object induces a sound.

b. Notice the single monotone hum. The PINPOINT mode produces only this single sound, regardless of the type of metal detected.

c. Move the quarter closer to and farther away from the searchcoil. Notice the changing depth-display values. The 2-digit depth reading indicates the distance, in inches, away from the searchcoil.

8