Adjusting the Arm Rest | Omega 8000 manual

ASSEMBLY

Adjusting the Arm Rest

The arm rest may be moved forward or backwards by removing the single screw and nut, and then repositioning the 2-piece arm rest. Users with shorter arms may find the arm rest more comfortable in the forward position. In order to move the arm rest backwards, the plastic plug must be removed from the aluminum tube.

Arm Rest Strap

The strap is provided for your convenience. Some users prefer to use the strap when swing the detector vigorously, in order to hold the detector secure against the arm.

The detector can also be used without the strap, with no

Battery Compartment (back side)

Headphone

Jack

Cable

Plug

Nut

armrest Screw

Hand-grip

S-Rod

Velcro

Strap

Locking

Collar

compromise to detector balance and stability under most conditions.

Search	Upper
Coil Cable	Stem

Locking

Collar

Arm Strap

Velcro

Strap

Biaxial

Searchoil

5

Image 5

Omega 8000 owner manual Adjusting the Arm Rest, Detector can also be used without the strap, with no

Contents

Off appliances and lights Metal Detector Table of Contents Metals which are made of, or contain, iron Terminology Assembly is easy and requires no tools Assembly Detector can also be used without the strap, with no Adjusting the Arm Rest Speaker Volume and Battery Charge Battery LifeBattery Indicator Segments Illuminated Battery Voltage Supplies Needed QUICK-START DemonstrationII. Position the Detector Wave each object over the searchcoil Bas Tone Nail Low Tone IX. Wave the nickel QUICK-STARTPress the Notch touchpad on the front panel three times XI. Wave the Nickel Identifying Buried Objects Ground MineralsTrash Basics Use with headphones not includedSize and Depth of Buried Objects Electromagnetic Interference EMI Operation and Controls Powering UP Sensitivity Control PanelDisc / AT Autotune Discrimination Freq Frequency Selection Control PanelGND Grab Ground Grab Notch Selective Target Inclusion or Exclusion Tones Number of Tones Selection Why do I need to Ground Balance? What is Ground BALANCING?How to Ground Balance your detector Ground Balancing Fe 3O Ground Error Ground Error Varying in proportion to target Ground Adjustment Chart Dime Dimes and pre-1982 copper pennies will register here Depth and Target DisplaySmall gold items will register under Iron or Foil Typical Value Possible Objects Pinpointing process in motion modes Search Techniques in Disc mode Narrow It Down Target Pinpointing in Pinpoint modePinpoint as follows Unit Specifications Year Limited Warranty