Manuals / Omega / Lawn and Garden / Metal Detector

Omega 8000 owner manual OPERATION and CONTROLS, How To Work The Controls, Powering Up

Models: 8000

1 24

Download 24 pages 1.01 Kb

Page 11

OPERATION and CONTROLS

OPERATION and CONTROLS

POWERING UP

Click the left knob to turn the detector ON.

After clicking the knob on, continued clockwise rotation will increase sensitivity.

We suggest keeping the sensitivity below 70 until you become familiar with the detector’s operation.

HOW TO WORK

THE CONTROLS

Fe2O4 -How mineralize is the ground & ????? ??

This segment will indic what metals are discrim OVERLOAD will blink when ??? ?????? ??????

GROUND SETTING will be indicated in double digits 00 to 99

ON/OFF/SENSITIVITY: Click to turn on.

Turn knob to increase detection sensitivity.

GROUND GRAB Press-and-hold touch pad in middle to activate

automatic ground balancing Press or to manually

adjust the ground setting

PINPOINT Press-and-hold to narrow down location of your finds

MODE SELECTION and DISCRIMINATION LEVEL control

Click LEFT to enter AutoTune Mode. Click RIGHT to enter DISCRIMINATION Mode. Rotate knob to desired discrimination level.

NOTCH

Press to selectively include or exclude specific target categories.

TONES

Press to customize the number of tones you hear and change tone characteristics

FREQUENCY

Press to change frequency to avoid interference

11

Image 11

Omega 8000 owner manual OPERATION and CONTROLS, How To Work The Controls, Powering Up

Contents

METAL DETECTOR 8 0MENU Selections TABLE OF CONTENTSRELIC TERMINOLOGYELIMINATION DISCRIMINATIONAssembly is easy and requires no tools ASSEMBLYThe detector can also be used without the strap, with no Adjusting the Arm RestArm Rest Strap ASSEMBLYBattery Voltage BATTERY LIFESPEAKER VOLUME AND BATTERY CHARGE BATTERY INDICATORV. Wave each object over the searchcoil QUICK-START DEMONSTRATIONI. Supplies Needed II. Position the DetectorXI. Wave the Nickel QUICK-START continuedIX. Wave the nickel X. Press the NOTCH touchpad on the front panel three times3. Identifying Buried Objects THE BASICS OF METAL DETECTING1. Ground Minerals 2. Trash5. Electromagnetic Interference EMI Use with headphones not includedTHE BASICS continued 4. Size and Depth of Buried ObjectsOPERATION and CONTROLS HOW TO WORK THE CONTROLSPOWERING UP 2. DISC / AT AUTOTUNE CONTROL PANELCONTROL KNOBS ARE AS FOLLOWS 1. SENSITIVITYTOUCHPAD CONTROLS ARE AS FOLLOWS CONTROL PANEL contGND GRAB Ground Grab FREQ Frequency SelectionNOTCH Selective Target Inclusion or Exclusion CONTROL SETTING DISPLAYTOUCHPAD CONTROLS continued TONES Number of Tones SelectionGROUND BALANCING WHAT IS GROUND BALANCING? Why do I need to Ground Balance?How to Ground Balance your detector INDICATION Ground ErrorGROUND BALANCING -Technical Info Fe3O4 BARGRAPHGROUND ERROR cont GROUND ERROR cont GROUND ADJUSTMENT CHARTAUDIO TARGET IDENTIFICATION SYSTEM READING THE DISPLAY DEPTH AND TARGET DISPLAYTYPICAL VALUE Pinpointing process in motion modes SEARCH TECHNIQUES in DISC modeCOIL DRIFT TARGET PINPOINTING in PINPOINT modePinpoint as follows Narrow It DownLag coefficient 92 milliseconds UNIT SPECIFICATIONSTREASURE HUNTER’S CODE OF ETHICS Operating principle VLF induction balanceFirst Texas Products L.L.C 5-YEAR LIMITED WARRANTYTREASURE HUNTER’S CODE OF ETHICS Proof of Purchase is required to make a claim under this warranty