Panasonic PT-L702SDE, PT-L701SDE Specifications, NTSC/NTSC 4.43/PAL/PAL-M/PAL-N/SECAM

Specifications

Some of the following specifications are also given in the separate PT-L702E or PT-L701E Operating Instructions, but refer to the following for specifica- tions pertaining to this particular model (PT-L702SDE or PT-L701SDE).

Power supply:		100 V–240 V ~, 50 Hz/60 Hz
Power consumption:		240 W Approx. 5 W–10 W when in standby mode
		(when fan is stopped)
LCD panel:
Panel size (diagonal): 0.9 type (22.86 mm)
Aspect ratio:		4:3 (16:9 compatible)
Display method:		3 transparent LCD panels (RGB)
Drive method:		Active matrix method
Pixels:		786 432 (1024 x 768) x 3 panels
Lens:		Manual zoom (1–1.3) / focus lens
Lamp:
PT-L702SDE:		UHM lamp (165 W)
PT-L701SDE:		UHM lamp (160 W)
Luminosity:
PT-L702SDE:		1200 lm/ANSI
PT-L701SDE:		1000 lm/ANSI
Scanning frequency:		(for RGB signals)
		Internal data (point scanning) method
	Horizontal scanning frequency		24 kHz–97 kHz
	Vertical scanning frequency		50 Hz–120 Hz
	Dot clock frequency		135 MHz or less
YPBPR signals:		NTSC (480i), 480p, PAL (625i), 720p, HDTV (1080i/
		1035i)
Colour system:		6 (NTSC/NTSC 4.43/PAL/PAL-M/PAL-N/SECAM)
Projection size:		762 mm–7620 mm (30"–300")
Throw distance:		1.1 m–11.7 m (3'8"–38'4”)
Optical axis shift:		9:1 (fixed)
Screen aspect ratio:		4:3
Installation:		Front/Rear/Ceiling/Desk (Menu selection method)
Speakers:		2.8 cm round x 2
Max. useable volume output:		2 W (1 W + 1 W) (stereo)
Connection terminals:
RGB/YPBPR IN:		Dual-line D-SUB HD 15-pin (female)
During YPBPR input:		1.0 V [p-p] (including sync signal), 75 Ω
Y:
PB,PR:		0.7 V [p-p], 75 Ω

32