Notes on handling the SD memory card
Be sure to read the following before
using the accessory SD memory FrontRear card.
Notes on handling
Be sure to observe the following.
BDo not disassemble or modify
the card.
BDo not subject the card to strong shocks, and do not twist
it, bend it, drop it, step on it or immerse it in liquids.
BDo not rub the card with cloth or plastic, or bring it close to objects which may generate static charges or magnetic fields.
BDo not touch the metal terminals with hands or metal objects, attach stickers to them, or allow them to become contaminated in any way.
BDo not remove the attached label from the card.
BDo not attach any other labels or stickers to the card.
Notes on storage
After removing the SD memory card from the projector or other device, always insert it into its protective case.
BDo no leave the card inside hot vehicles or in other places with high temperatures such as places exposed to direct sunlight.
BDo not leave the card in places which are exposed to substances such as corrosive gases.
Protecting valuable data
BDo not turn off the projector power supply or remove the SD memory card from the projector while the card is being accessed for reading or writing (while the SD memory card access indicator inside the card slot cover at the rear of the projector is flashing). Failure to observe this may result in loss of data.
BAlways make a backup of the data which is stored in the SD memory card. Accidental mistakes in using the card may sometimes result in the loss of valuable data.
7
