JBL 201, SDP-5, Home Theater System manual Center, FULL, 30Hz to 120Hz, THX 80Hz, None

SDP-5

SETUP

MAIN MENU

MODE ADJUST AUDIO CONTROLS SETUP

SETUP

INPUTS

SPEAKERS

REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER

LOCK OPTIONS

SPEAKER SETUP

CUSTOM SETUP SYNTHESIS 7CH SETUP SPEAKER DISTANCES LEVELS CALIBRATION

		R	SR	RR
		80Hz	80Hz	80Hz
		C
		80Hz
	M	L	SL	RL
	SUB
80Hz		80Hz	80Hz	80Hz

CUSTOM SETUP

FRONT L/R	80Hz
CENTER	80Hz
SIDE L/R	80Hz
REAR L/R	80Hz
SUBWOOFER	80Hz
THX ULTRA2 SUB	OFF
BGC	N/A
ASA	APART

CENTER SPEAKER

FULL 30Hz 40Hz 50Hz 60Hz 70Hz 80Hz THX 80Hz 90Hz 100Hz 110Hz 120Hz

NONE

CENTER			FULL, 30Hz to 120Hz, THX 80Hz, NONE
SETUP	SPEAKERS	CUSTOM SETUP	CENTER

Opens the CENTER SPEAKER menu shown above, which can be used to select a crossover point for the Main Zone audio output connector labeled Center. When set to FULL, the SDP-5 sends a full- range audio output signal to this connector. Otherwise, the SDP-5 activates a crossover point at the selected setting. Choose the setting closest to the low-frequency rating of the associated speaker. When set to NONE, the SDP-5 redirects center channel signals to the Main Zone audio output connectors labeled Front L/R.

Note:

When the CENTER parameter is set to NONE, center channel signals will not be redirected if the 5.1a BYPASS listening mode is activated. To redirect center channel signals, configure the speaker setup with the associated DVD-A/SACD player.

. . . Custom Speaker Setups continues on page 3-30

3-29