JBL SDP-5, Home Theater System, 201 JBL Synthesis 7-Channel Speaker Setups from, THX 80Hz, None

SETUP

JBL Synthesis

JBL Synthesis 7-Channel Speaker Setups (continued from page 3-35)

MAIN MENU

MODE ADJUST AUDIO CONTROLS SETUP

SETUP

INPUTS

SPEAKERS

REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER

LOCK OPTIONS

SPEAKER SETUP

CUSTOM SETUP SYNTHESIS 7CH SETUP SPEAKER DISTANCES LEVELS CALIBRATION

		R	SR	RR
		80Hz	80Hz	80Hz
		C
		80Hz
	M	L	SL	RL
	SUB
80Hz		80Hz	80Hz	80Hz

SYNTHESIS 7CH SETUP

!CAUTION!

PRESSING THE V

BUTTON WILL

AUTOMATICALLY CHANGE

THE OUTPUTS TO A

SYNTHESIS

7CH SPEAKER

CONFIGURATION

SYNTHESIS 7CH SETUP

FRONT L/R*	80Hz
CENTER*	80Hz
SIDE L/R*	80Hz
REAR L/R	80Hz
SUBWOOFER*	80Hz
THX ULTRA2 SUB	OFF
BGC	N/A
ASA	APART

*These parameters cannot be adjusted.

REAR SPEAKERS

80Hz

NONE

REAR L/R					THX 80Hz, NONE
SETUP	SPEAKERS	SYNTHESIS 7CH SETUP	REAR L/R

Opens the REAR SPEAKERS menu shown above, which can be used to activate and deactivate the Main Zone audio output connectors labeled Rear L/R. When set to 80Hz, the SDP-5 activates these connectors and configures all Main Zone audio output connectors for a JBL Synthesis 7-Channel speaker setup. When set to NONE, the SDP-5 deactivates these connectors and configures the other Main Zone audio output connectors for a JBL Synthesis 5-Channel speaker setup.

Note:

When the REAR L/R parameter is set to NONE:

•Dolby Digital Surround EX, THX Ultra2, THX Surround EX, and dts-ES decoding are not available.

•The ASA parameter is not available.

The SYNTHESIS 7CH SETUP menu THX ULTRA2 SUB, BGC, and ASA parameters are identical to the CUSTOM SETUP menu THX ULTRA2 SUB, BGC, and ASA parameters. When one of these parameter settings is adjusted on one menu, it is automatically adjusted on the other menu at the same time. Refer to pages 3-33 and 3-34 for these parameter descriptions.

3-36