JBL Home Theater System, SDP-5, 201 manual Horizontal Bar Graphs

Basic Operation

JBL Synthesis

To select the desired setting on a parameter drop-down menu:

1. When the drop-down menu opens, press the remote control

Menu and arrows to scroll upward and downward through the complete list of available settings. The current setting appears beneath the parameter name on the on-screen and front panel displays.

2. When the desired setting appears beneath the parameter name, press the Menu arrow to select the setting and close the drop-down menu.

Horizontal Bar Graphs

Selecting some menu parameters opens a horizontal bar graph, which indicates the position at which the current parameter setting falls within the entire parameter range. The current setting appears at the right of the parameter name on the on-screen and front panel displays.

For instance, selecting the DISPLAY SETUP menu A/V SYNC DELAY parameter opens the horizontal bar graph shown below, which can be used to adjust the amount of audio delay.

To adjust a parameter setting with a horizontal bar graph:

1. When the horizontal bar graph appears, press the remote control Menu and arrows to increase and decrease the setting in designated increments. The current setting appears at the right of the parameter name on the on-screen and front panel displays.

2. When the desired adjustments have been made, press the Menu arrow to select the setting and close the horizontal bar graph.

Note:

Menu item selection instructions differ for certain menus. These instances are noted throughout this user guide.

DISPLAY SETUP

ON-SCREEN DISPLAY FRONT PANEL DISPLAY

A/V SYNC DELAY	OFF
CUSTOM NAME	OFF
EDIT CUSTOM NAME

OFF, 1 to 60ms

2-10